toner
65-3720-03 Friction and Wear Testing Equipment EFM-3 Series EFM-3-H
Product Description
Product Model: 65-3720-03Product Brand: A&D Feature […]
Contact Us
Product Details
Product Model: 65-3720-03
Product Brand: A&D
Features
- Can be used for the scientific elucidation and technical evaluation of the properties of sliding friction, lubrication and wear, which is the surface behavior of two materials relative to each other.
- Compliance with JIS K 7218 (Compatible with ring, disc and pin specimens)
- Sliding speed range 0.001~1000 cm/sec
- Friction force measuring range 0.02~10 N m
- Development into a customizable system (e.g., adding measurement and control items)
- [Application]
- Evaluation of friction properties for various materials and products (Metals, plastics, ceramics, bearing materials, brake linings, clutch plates, self-lubricating materials, lubricating oils, etc.)
- measurement of the dynamic friction coefficient
- measurement of wear
- Measurement of critical PV values
- Evaluation of Baking Conditions
- Evaluation of Friction Properties by Combining Various Materials
- Evaluation of the relationship between surface treatment and friction characteristics
- Evaluation of the relationship between environmental conditions and friction characteristics
Spec
- Application: Durable Type
- Pressure load range: 20~5000
- Maximum rotational shaft torque (N · m): 3
- Friction force range (N · m): 0.02~3
- Shaft speed (rpm): MAX3350
- Slip speed range (cm/sec): 0.6~400 when using standard ring specimens
- Maximum continuous operation time (hr): 1000
- Drive motor: AC servomotor
- Adaptive specimens: rings, discs, pins
- Operation: Color Touch Panel
- Display: Pressure detection value, friction force, rotation speed, pseudo wear amount, test time, manual operation command button, rotation/stop
- Temperature indicator: For test specimens, temperature indicator 0~300°C, compatible with K thermocouple (sheath diameter Φ1 mm)
- Automatic pressurization mechanism: yes
- Automatic operation end setting and operation: Operation time, automatic test stopped after decompression work according to various limit conditions
- Automatic stop (no abnormal stop or decompression work at the time of stop): motor abnormality, pressure full scale over, friction force full scale over, pressure movement upper and lower limit
- Load Detector: Load Cell Type 5 kN (for Pressurization)/1 kN (for Pressurization)/100 N (for Pressurization/Friction)/20 N (for Friction)
- Pressure Spring: 3 Types for 5 kN, 1 kN, and 100 N
- Power (Cable length 5 m, Cable diameter Φ3): 200 VAC, 6kVA
- Ground fault breaker: included
- Body Dimensions: W630 x D660 x H1600mm
- Body mass: 350 kg
Related product recommendations
You may also be interested in the following products
toner
65-4295-90-20 Sealed Pressure Gauge (75Φ) Vertical A Frame for Steam with 0.6 MPa Inspection Certificate BC10-181
model: 65-4295-90-20
brand: NAGANO KEIKI Co., Ltd.
toner
toner
toner
62-0832-33 Compensating Lead Wire (For R Thermocouple) RX (Outer Diameter 3.1 x 5.4mm) 1m RX-H4/0.65X2
model: 62-0832-33
brand: FA Ubon