Features

• Passive Matrix microOLED Modules with GOLDELOX processor, 4D Systems. 4D Systems' range of passive matrix microOLED modules with GOLDELOX processor come in three sizes: 0.96 inch, 1.5 inch and 1.7 inch. Each of the modules benefits from an embedded GOLDELOX graphics controller that is driven by Extensible Virtual Engine (EVE). GOLDELOX contains lots of features that enable you to display full colour images, animations, icons and videos on your microOLED. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language. Features ; Benefits: 0.96 inch microOLED — ; 9028672 9028672 Digital I/O features such as A/D converter, sound generation, RTTTL sound engine, joystick, buttons and Dallas 1-Wire devices Dimensions: 26 mm x 21 mm x 13.2 mm Viewing area: 20.1 mm x 13.4 mm 96 x 64 resolution Up to 65k colours 10 KB of flash memory 510 B of RAM 1 asynchronous hardware serial port microSD memory card adaptor Supports Windows fonts and characters Suitable for a 4.0 V to 5.5 V power supply Back plate with 4 x 3mm holes for mounting 1.5 inch microOLED — ; 9028675 9028675 Digital I/O features such as A/D converter, sound generation, RTTTL sound engine, joystick, buttons and Dallas 1-Wire devices Dimensions: 45.5 mm x 33.5 mm x 6.1 mm Viewing area: 27 mm x 27 mm 128 x 128 resolution Up to 65k colours 10 KB of flash memory 510 B of RAM 1 asynchronous hardware serial port microSD memory card adaptor Supports Windows fonts and characters Suitable for a 4.0 V to 5.5 V power supply Back plate with 4 x 3mm holes for mounting 1.7 inch microOLED — ; 9028678 9028678 Digital I/O features such as A/D converter, sound generation, RTTTL sound engine, joystick, buttons and Dallas 1-Wire devices Dimensions: 52 mm x 32 mm x 6.1 mm Viewing area: 33.6 mm x 27 mm 160 x 128 resolution Up to 65k colours 10 KB of flash memory 510 B of RAM 1 asynchronous hardware serial port microSD memory card adaptor Supports Windows fonts and characters Suitable for a 4.0 V to 5.5 V power supply Back plate with 4 x 3mm holes for mounting