laboratoryinstruments
64-1201-39 Housing 1PP-1-FS-000 43011000
Product Description
Product Model: 64-1201-39Product Brand: ADVANTEC Featur […]
Contact Us
Product Details
Product Model: 64-1201-39
Product Brand: ADVANTEC
Features
- A single-piece plastic housing with a head and torso.
- Beca*** it is made of high-purity polypropylene without fillers or colorants, there is little leaching from the housing and it can be ***d to filter high-purity chemicals and ultrapure water.
- The smooth interior surface of the housing prevents the retention and adhesion of fine particles and microorganisms, providing excellent sanitary properties.
- 1PP types are available in 250 mm and 500 mm filter dimensions, and can be selected for cartridge filter shape codes C, F (flat gasket DOE), TCW type and M, H(222 O-ring SOE).
Spec
- Number of Cartridges: 250 mm x 1 piece
- Applicable Cartridge Filter Shape Codes: C, F (Flat Gasket DOE) and TCW Type
- IN/OUT Shape: 3/4 "PTF (3/4" with PT Nipple)
- Dimensions : overall height ( mm )/340 , full width/200 mm
- maximum working pressure: 0.49 MPa (25 °C), 0.19 MPa (60 °C)
- Maximum operating temperature: 60 °C
- material: Head/Polypropylene, Trunk/Polypropylene, O-Ring/Silicone (Standard), Vent/SUS304 (Push Button Type/Standard), Adapter/Polypropylene, Adapter Spring/SUS304 (Standard), 3/4 "PT Nipple/Polypropylene
- Mass (kg): 0.84
- Pressure gauge: none (typical)
- *Cannot be ***d for gas filtration.
- *Autoclave Sterilization is not available.
- *Wrap the sealing tape around the piping taper screw.
- *This product ***s plastic, so it will deteriorate over time.
- *The degree of deterioration varies dep***ing on the temperature, pressure, and chemical history of the operating conditions. If any abnormalities are found, replace the product with a new one or replace parts sold separately.
- *Do not connect metal piping directly to the head.
- *Do not tighten the vent plug or drain plug with a tool such as monkey wrench.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
1-4602-42-22 Magnetic Stirrer REXIM (Digital) 158 x 143 mm with Pre-Shipment Inspection Document LS-1D
model: 1-4602-42-22
brand: AS ONE Corporation
laboratoryinstruments
61-4690-43 Deckworks Universal Fit Tip 200μl Yellow No Sterilization Bulk Packaging 4112
model: 61-4690-43
brand: Corning Incorporated
laboratoryinstruments
3-6276-01 ［Discontinued］Smart Pump 10 - 250mL/min ASP-250
model: 3-6276-01
brand: KITAGAWA, KOMYO RIKAGAKU KOGYO K. K.
laboratoryinstruments
65-8681-53 Glass Filter Diameter 30 mm Filter Pore (Pore Size) No. 1 160~100 μm 7G-1
model: 65-8681-53
brand: NIPPON RIKAGAKU KIKAI