Features

• Description
• The MicroMod Main Board is a specialized carrier board that allows you to interface a MicroMod Processor Board with a single MicroMod Function Board. With the M.2 MicroMod connector, connecting your Processor and Function Boards is a breeze. Simply match up the key on your board's beveled edge connector to the key on the M.2 connector and secure the boards with screws.
• The Single Main Board includes one USB-C connector for power and programming the Processor Board. Two buttons for reset and boot are also populated on the board. Also included on the board is a 2A resettable f*** and 3.3V/1A voltage regulator. We've even added a convenient jumper for advanced ***rs looking to bypass the f*** and another to measure the current consumption for low power testing. For those that need to go remote with their application, the board includes a 2-pin JST connector and a single cell LiPo MCP73831 charge IC(set to a rate of 500mA). Three status LEDs are available for power and charging. There is a microSD card socket so you can also plug in a microSD card for data logging. Finally, two Qwiic connectors are populated on the board to easily add Qwiic enabled I2C devices to your projects!
• Note:A MicroMod Processor and Function Board are not included with the MicroMod Main Board. These boards will need to be purchased separately.
• MicroMod is a modular interface ecosystem that connects a microcontroller "processor board" to various "carrier board" peripherals. Utilizing the M.2 standard, the MicroMod standard is designed to easily swap out processors and function boards on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!
• Get Started with the MicroMod Main Board Guide
• Features
• Input Voltage Range
• 5V via USB C Connector
• ~3.7V to 4.2V via LiPo Battery Connector
• Built-in Resettable PTC F***(Rated 5V/2A)
• AP7361C 3.3V Voltage Regulator(Rated 1A)
• Integrated MCP73831 Single Cell LiPo Charge Circuit
• Adjustable Charge Rates via DIP Switch
• 100mA
• 166mA
• 500mA
• Ports
• 1x USB Type C Connector
• 1x 2-Pin JST Connector
• M.2 Connectors
• 1x MicroMod Processor Board
• 1x MicroMod Function Board
• 2x Qwiic Enabled I2C
• 1x MicroSD Card Socket
• 1x SWD 2x5 Header
• Buttons
• 1x Reset
• 1x Boot
• LEDs
• 1x VIN
• 1x 3.3V
• 1x CHG
• Jumpers
• MEAS
• PTC
• 3.3V EN
• VIN LED
• 3.3V LED