Features

• Description
• Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is int***ed to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board, but that's ok, beca*** you will want to preserve your view of the 2.4" TFT display, six RGB LED's and three switches squeezed onto this board!
• Can you *** the SparkFun Top pHAT to prototype machine learning on your Raspberry Pi 4, NVIDIA Jetson, Google Coral or another single-board computer? Indubitably! The SparkFun Top pHAT supports machine learning interactions including voice control with on-board microphones speaker, graphical display for camera control feedback, and uninhibited access to the RPi camera connector. Additionally, you can *** the programmable buttons, joystick, and RGB LED for ***r defined I/O, dynamic system interaction, or system status displays.
• Can you *** it as an interface to introduce your project to the SparkFun Qwiic ecosystem? Indeed! In addition to all the previous features, we have also included a Qwiic connector to allow easy integration over I2C. Billions of combinations of Qwiic-enabled boards are available to you to expand upon the capabilities of the SparkFun Top pHAT.
• With all the I/O interaction on this board and the lack of soldering needed to get up and running, the SparkFun Top pHAT is the fundamental machine learning add-on for Raspberry Pi or any 2x20 GPIO SBC!
• Note:The I2C address of the Top pHAT is 0x71 and is hardware defined. A multiplexer/Mux is required to communicate to multiple Top pHAT sensors on a single bus. If you need to *** more than one Top pHAT sensor consider using the Qwiic Mux Breakout.
• Get Started With the SparkFun Top pHAT Hookup Guide
• Features
• A Raspberry Pi pHAT that foc***s on ***r interaction with an SBC/RPi.
• Support for machine learning interactions
• Voice control(microphones, speaker)
• Graphical display on 2.4" color TFT
• Two Programmable buttons for ***r defined I/O
• Programmable Joystick - for dynamic/interaction with system(GUI menus, robot driving).
• Programmable RGB LEDs - for system status, display, etc...
• Does not inhibit access to RPi camera or display connector
• Off switch for Rpi
• Supports access to the SparkFun Qwiic ecosystem
• Int***ed to be at the top of a pHAT stack - no pins for stacking on top of this board. It's the Top pHAT!