![63-3035-53 [Discontinued]SparkFun Transceiver Breakout - RS-485 BOB-10124](https://www.jgauge.com/wp-content/uploads/2025/05/46f054e4d2536f97adebbd5af41a6ea0.webp)
suctioncupmask
63-3035-53 [Discontinued]SparkFun Transceiver Breakout - RS-485 BOB-10124
Product Description
Product Model: 63-3035-53Product Brand: SparkFun Featur […]
Contact Us
Product Details
Product Model: 63-3035-53
Product Brand: SparkFun
Features
- The Transceiver Breakout (RS-485) is a breakout board for the SP3485 (RS-485 Transceiver IC) that converts UART inputs and outputs to RS-485. Beca*** the SP3485 is a half-duplex transceiver, it can communicate in only one direction at a time, but it can transmit at speeds up to 10Mbps. This board operates on a +3.3 V power supply and has very low power consumption. RS-485 I/O is divided into 3 different connections:
- (1)RJ-45 connector,
- (2)3 pin 3.55 mm screw terminal
- (3)3 pin 0.1 inch pitch header
- Note that none of these output connectors are implemented.
- Main Specifications
- Installed Devices: SP3485
- Power supply voltage: +3.3 V
- Interoperable with +5.0 V logic
- RS-485 I/O (RJ-45 connector, 3.5 mm screw terminal, 0.1 inch pitch header)
- Driver/Receiver Enabled Connected to the RTS Line
- Common mode input voltage range: -7 V to +12 V
- Up to 32 transceivers on the serial bus
- Driver output short circuit protection
- Size: 2.28 x 2.54 mm (0.9 x 1.0 inches)
Spec
Related product recommendations
You may also be interested in the following products
67-0427-50 [Discontinued]Luxonis Oak-D DepthAI Hardware SEN-17770
model: 67-0427-50
brand: SparkFun
64-5665-95 Unit Type Switching Power Supply 150 W 15 VD HWS150A-15ME
model: 64-5665-95
brand: TDK-Lambda Corporation
67-0427-41 [Discontinued]Capacitive Fingerprint Scanner - AS-108M SEN-17151
model: 67-0427-41
brand: SparkFun
64-5602-03 [Discontinued]Selector Switch (Arrow Handle), Each Position Stopped/Contact 2a ASD320N
model: 64-5602-03
brand: IDEC CORPORATION