4-745-11 Digital Dry Desiccator H-Series 574 x 524 x 1765 mm TDD-H600SPC
gasmonitors

4-745-11 Digital Dry Desiccator H-Series 574 x 524 x 1765 mm TDD-H600SPC

model: 4-745-11
brand: AS ONE Corporation
category: gasmonitors

Product Description

Product Model: 4-745-11Product Brand: AS ONE Corporatio […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 4-745-11
Product Brand: AS ONE Corporation

Features

  • Continuously removes moisture from the inside air -
  • A new type of solid polymer electrolyte membrane (Rosal ®) is installed on the front panel to directly electrolyze and continuously remove moisture from the inside air.
  • Wide Dehumidifier Area & Digital Settings - Moisture inside the desiccator is discharged directly to the outside in a gaseous state, so no water droplets (drain) are produced.

Spec

  • external dimension (mm) : 574 x 524 x 1765
  • inner size (mm) : 560 x 483 x 1486
  • Dehumidification system: H2O electrolysis discharge by solid polymer electrolysis dehumidification element (Rosalle ®)
  • Dehumidification ability (When 30% rh is set) * 1: Within 8 hours
  • Humidity Setting Range: 10 to 60% RH
  • Humidity control range * 2: 15 %RH to indoor temperature
  • measurement range : 0 to 60 ° C/10 to 60 %RH
  • Temperature and Humidity Sensor: Temperature/Thermistor Element, Humidity/Resistance Type Sensor for Low Humidity Measurement
  • Dehumidifying element area: about 98 cm2
  • Humidity Control System: Microcomputer-Based ON/OFF Control
  • Temperature and Humidity Display Accuracy * 3: ± 1 ° C (25 to 40 ° C)/± 5 %RH (15 to 40% RHat 25 ° C)
  • Display resolution: 1 ° C/1 %RH
  • Sampling interval: 0.5 sec
  • material: Body/PMMA (acrylic)/Frame/Aluminum/Control Unit/Steel Steel Plate
  • shelf board Dimensions : 490 mm x 460 mm
  • Shelf Board Mounting pitch (Min shelf board interval): 50 mm (35 mm)
  • shelf board Specifications : Reinforced Plastic (impact resistant polystyrene)
  • shelf board Load tolerance Co., Ltd.: about 10 kg/sheet
  • Safety device: individual operation abnormality error display function of solid polymer electrolysis dehumidification element (In case of short circuit or disconnection)/overcurrent f***
  • power supply: AC100V 50/60 Hz
  • Power Consumption: about 63 W
  • power cord length : about 2 m (3P Plug/Body Grounded)
  • Caster: φ 65 Made of mm Nylon (With Stopper x 2 pieces)
  • Weight: about 38 kg
  • Inner Outlet: Outlet Part/3P x 2 inlets (Cable for rear connection approx. 2m, separate system from dehumidification unit), rating/AC100V 15 A (Within Connection capacity)
  • Accessory: Reinforced Plastic shelf board x 4 pieces

*This product might require extra fees.

Related product recommendations

You may also be interested in the following products

3-4064-12 Piping Parts Round Hood -
gasmonitors

3-4064-12 Piping Parts Round Hood -

model: 3-4064-12 brand: AS ONE Corporation
1-6012-01 Resin Faucet S
gasmonitors

1-6012-01 Resin Faucet S

model: 1-6012-01 brand: AS ONE Corporation