Features

• WRAS (UK) KIWA-Swedcert (Sweden) GOST-R (Russia) Expert Conclusion (Russia) EAC Conforming (Russia) UkrSepro (Ukraine) RoHS Compliant. Freezing of the fluid in the installation may severely damage the valve. Approvals apply to specific configurations only. S.24 Dezincification-Resistant, Full Port Brass Ball Valve - 1/4 Turn. Several governmental authorities recomm*** *** of special alloys for valves handling water in areas where there is a problem of dezincification. DZR valves are designed to meet such requirements. Through the *** of new technology these valves retain the reliability and competitiveness of brass, but are comparable to bronze in corrosion resistance. Be kind with yourself and make sure the valve that brings you pure fresh water is a DZR valve. Application : Drinking water, water, plumbing Operating Temperature : -40ﾟC (-40ﾟF) / +170ﾟC (+350ﾟF) Operating pressure : PN30 up to 2 ‘ ‘ non-shock cold working pressure Threads : EN 10226-1, ISO 228 parallel threads Port : Full Stem Configuration : Blowout-proof nickel plated brass stem, with two FPM O-rings at the stem for maximum safety Ball seats : Pure PTFE self-lubricating, with flexible-lip design Body : DZR brass. Full port to DIN 3357 for maximum flow 100% Made in Italy Chrome plated DZR brass ball for longer life Silicone-free lubricant on all seals Travel stops on body to avoid stress at stem 24h 100% seal test guaranteed Dual sealing system allows valve to be operated in either direction making installation easier No metal-to-metal moving parts No maintenance ever required Handle clearly shows ball position Quality : Hot forged sand blasted DZR un-plated brass body and cap sealed with Loctite or equivalent thread sealant Dezincification Resistant ADZ-T and ADZ-P brass approved to SBN-PFS 1983:2 and NR-BFS 1988:18 specifications. Hot forged sand blasted DZR unplated body and cap sealed with Loctite or equivalent thread sealant Dezincification Resistant ADZ-T and ADZ-P brass approved to SBN-PFS 1983:2 and NR-BFS 1988:18 specifications. Working Pressure:. 30 Bar Kg/cm2 (450 PSI) non-shock cold working pressure. Flow:. Full port to DIN 3357 for maximum flow. Thread:. EN 10226-1, ISO 228 parallel female by female threads. Seals:. Pure PTFE self-lubricating seats with flexible-lip design