Spec

• Approximately 4㎡ of coating per 1L (depending on the road surface condition) fire strictly prohibited
• Liquid type
• Component: Organic solvent, synthetic rubber, synthetic resin
• Capacity: 1L
• Construction procedures for the installation of a road surface sign, pick a day with good weather and be sure to follow the following procedures. 1 Remove garbage, dirt, oil content, moisture, etc. from the road surface on which you install a sign. Mark the road surface with the shape of the sign with a chalk, etc. and cover surrounding area with gummed tape, etc. that serves as masking. 2 Apply the primer using a spatula, etc. to smooth the installation surface. Spread the primer uniformly while being careful not to apply too much. 3 When you finish applying the primer, make sure that moisture, garbage, etc. do not stick to the surface and leave it until it becomes completely dry. 4 When the surface becomes completely dry, remove the masking, put the sign into the place, remove the back paper while pressing down the sign so that it does not move, and apply enough pressure to the sign.
• Primer M-33