Spec

• No fire (hazardous materials class 4 first petroleum 168ml hazardous grade II)
• Spray type
• Component: Toluene, acetone, N hexane
• Content: 35～45%
• Capacity: 420ml
• About 4 road surface signs of 900 x 600mm per 1 can (depending on the condition of road surfaces)
• Construction procedures for the installation of a road surface sign, pick a day with good weather and be sure to follow the following procedures. 1 Remove garbage, dirt, oil content, moisture, etc. from the road surface on which you install a sign. Mark the road surface with the shape of the sign with a chalk, etc. and cover surrounding area with gummed tape, etc. that serves as masking. 2 Shake the container well, spray the primer with a distance of 20 - 30cm between the surface and the spraying mouth. Apply the primer on the surface thinly 2- 3 times rather than thickly at once. 3 When you finish applying the primer, make sure that moisture, garbage, etc. do not stick to the surface and leave it until it becomes completely dry. 4 When the surface becomes completely dry, remove the masking, put the sign into the place, remove the back paper while pressing down the sign so that it does not move, and apply enough pressure to the sign.
• Primer A