Features

• Solid extraction equipment assembled using hot immersion extractor EX86-4.
• At the bottom of the extractor, rising steam and falling liquid pass through the same tube.
• Considering the use of low-boiling solvents such as diethyl ether, a double-tube gym-funnel cooler C38-2 with high slow calorific value is used.
• Also comes with 1 solvent flask, 1 extraction joint, and 1 filter tube.
• The coolant drops into the center of the sample.
• The solvent vapor fired from the flask always warms the sample, which enhances the extraction effect.
• * The indicated volume mL is the size of the solvent flask, and the volume cm3 in parentheses is the volume of the filter tube or cylindrical filter paper, and the amount of sample preparation.
• It is a solid extractor.
• Place the solid sample in the filter tube and allow the solvent to reflux.
• Since it is heated by steam rising around, it is especially suitable for extracting oil and fat.
• Also, it can be used even if the sample is lighter than the solvent because it does not float.