chemicalproducts
2-6393-41-20 ［Discontinued］Dry heat sterilizer left door (right handle, left opening) with Calibration Certificate KM-450V
Product Description
Product Model: 2-6393-41-20Product Brand: AS ONE Corpor […]
Contact Us
Product Details
Product Model: 2-6393-41-20
Product Brand: AS ONE Corporation
Features
- A simple natural convection type dry heat sterilizer.
- The clear LCD display is very easy to see and simple to operate.
- In addition to the PV/SV two-stage display that makes it easy to check the measured values and the set values, the over-temperature rise prevention set temperature display is adopted.
- Four timer functions (ON, OFF, ON/OFF, SV start) are provided as standard.
- The temperature control uses PID control, which enables stable temperature control with high accuracy.
- Equipped with Digital setting type Overrise prevention device
Spec
- Left door (right handle, left opening)
- External dimensions (mm): 550 x 567 x 760
- Internal dimensions (mm): 450 x 447 x 450
- Temperature adjustment range: room temperature + 20 ~ 250 degrees C
- Materials: Exterior/Steel (powder coating), Interior/SUS 304 (some SUS 443 J 1)
- Temperature control system: PID control, SSR output
- Safety device: Digital setting type overrise prevention function/Overcurrent breaker/burnout mechanism (Heater OFF when sensor is disconnected)
- Power supply: 100 VAC 50/60 Hz
- Heater: 1400 W
- Weight: approximately 40 kg
- Accessories: 2 shelves, 2 sets of shelf receptacles
- *This product is not a medical device and should be used for research and development purposes.
- *It can not be used to sterilize medical instruments.
- Specifications: Calibration Certificate
- *This product is a general calibration. A Calibration Certificate (Calibration Certificate, inspection report and traceability system diagram) is attached.
- *I'm calibrating the Temperature Sensor.
- *The standard calibration point is 100 degrees Celsius. If you would like additional points, please contact us separately.
- *The Calibration Certificate is in Japanese.
- *"With Calibration Certificate" is an original service of Azwan that calibrates measuring instruments at the time of shipment by Azwan or Azwan subcontractors and issues a Calibration Certificate.
Related product recommendations
You may also be interested in the following products
chemicalproducts
1-1644-51 ［Discontinued］Brush PBT Hair, Wooden Handle 30mm 1 Box (10 Pcs) 828A
model: 1-1644-51
brand: AS ONE Corporation
chemicalproducts
3-7884-01 Ultrasonic cleaner (for glassware): 900 x 600 x 926mm IUC-900X
model: 3-7884-01
brand: Tokyo Ultrasonic Engineering Co., LTD.
chemicalproducts
chemicalproducts