Features

• Hirschmann Test ; Measurement Multimeter Safety Probe Set. Brought to you by Hirschmann Test ; Measurement, a safety test probe set conforming to IEC 1010 safety requirements. The sharp contact tips can penetrate the insulation and oxide layers and are protected by removable safety caps. Contact area also duals as a 4mm plug so they may be connected to any 4mm standard socket. Assemblies are 1 m long and cable is 1 mm² PVC. Rated to 1000V CAT II, a.c./16A. All models are highly reliable and excellent quality. Features and Benefits. Sharp probe tips for ease of *** Durable and long lasting Connects to any 4 mm standard socket 1000 V CAT II. What are test leads?. These leads are connecting cables which are ***d specifically for Multimeters, attaching a test probe to the *** will allow the ***r to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. What are test probes?. Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Hirschmann Test ; Measurement, each probe provides much-needed precision. What are the differences between safety categories?. For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.