Features

• It is a high-NA infinity correction objective lens for processing ***d in 3 times wave (355 nm) of YAG laser.
• Since it is designed to suppress aberrations in the visible range, it is also possible to observe the machined surface coaxially with the laser beam.
• The working distance (WD) is long, the curvature of the image plane is corrected, and a natural observation image can be obtained to the periphery of the field of view.
• It is an infinity-corrected objective lens that can be ***d in coaxial observation systems and laser introduction optical systems.
• Can also be ***d for observing near ultraviolet light.
• The objective lens can be ***d with a pulsed laser even in visible light (532 nm).
• A fixed objective lens holder (LHO-26) is available.
• The observation unit with coaxial illumination (OUCI-2) and the dichroic block for laser introduction (DIMC) are available as the lens barrel for laser processing.
• * When the objective lens is ***d for laser processing, ext*** the incident beam diameter (1/e^2) to about half of the pupil diameter.
• * If the incident beam is too thin, a small focusing spot cannot be obtained. Also, high laser energy density can damage the objective lens.
• * When laser beam machining is performed using an objective lens, the surface of the objective lens may become dirty due to the machined spring.
• * Ensure sufficient operating distance (WD) or insert a thin glass shield to protect the objective lens from contamination.
• * The magnification is the same as when the imaging lens f=200 mm is ***d.
• * Magnification may differ when ***d with a microscope barrel of another manufacturer.
• * For the actual magnification, check the focal length of the imaging lens of the lens barrel you are using, and determine the ratio between the focal length of the imaging lens and the focal length of the objective lens.