Spec

• Filtration area, m
  
  ²
  
  : 0.43
• Length from inlet to outlet, cm (inch): 15.2 (6.0)
• Hold-up volume, mL: 175
• Processing capacity, L: 600?1200
• Length, cm (inch): 38 (15)
• Support material: Polypropylene
• Seal material: Silicone
• Device material: Polypropylene
• Vent cap material: Polypropylene
• Material: Polyethersulfone
• Application: Retrovirus removal
• Brand name: Viresolve
• Main application: Protein Purification
• Package: Double easy open bag
• Form: Capsule
• Connection, Vent/drain: 1/4in. hose port double O-ring seal
• Connection, Inlet/outlet: 38 mm (1-1/2in.) sanitary flange
• Quantity/box: 1
• Overview: Opticap XLT 10 Viresolve NFR 1-1/2in. TC/TC
• Product name: Opticap XLT 10 capsule filter
• Maximum Inlet Pressure (psig): 80
• Maximum Inlet Temperature, °C: 25
• T-line/Gauge Port: T-line
• Air diffusion flow rate, 23 °C: ?16mL/minute @ 340kPa (50psig), moisted in water
• Maximum input pressure, kPa (psi): 550 (80) @ 23 °C
• Maximum differential pressure, kPa (psid): Forward: 550(80), reverse direction: 340(50)
• Sterilization: After wetting, Liquid cycle, with slow exhaust, Autoclave sterilization at 125℃ for 60 minutes, available up to 3 times
• Total extract: The extractables level was equal to or less than 35
  
  
  mg after a 10
  
  
  minute 1.5
  
  
  LPM/ft2 flush and 24
  
  
  hours in water at controlled room temperature.
• Potassium permanganate reduced substance: Effluent after flashing with 4L of water conforms to USP Oxidizable Substances Test
• ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.