Electronic/Electrical Parts and Controll Equipments
63-6982-60 Asco Pneumatic Regulator 228.6 SCFM, 6530 L/min G 3/8, 0.5 → 10bar G652AR003GA00H0
Product Description
Product Model: 63-6982-60Product Brand: Asco Features 6 […]
Contact Us
Product Details
Product Model: 63-6982-60
Product Brand: Asco
Features
- 651/652 Series Regulator
- This is a high flow regulator for ASCO's 651/652 series air preparation equipment. This pneumatic regulator has threaded ports and can be installed alone or on other 651/652 series equipment. The 651/652 series is a modular air preparation system that is easy to install and configure and is suitable for a variety of compressed air applications.
- Features and benefits: High flow rate with a wide adjustable output range
- Decompression, non-decompression, and internal flow check options
- Low profile gauge bar/PSI
- Optional ext***ed temperature range: -40 → +80 °C
- Screw ports compatible with single or modular mounting
Spec
- Quantity:1piece
- Port Connection : G 3/8
- Minimum Outlet Pressure : 0.5bar
- Maximum Outlet Pressure : 10bar
- Maximum Input Pressure : 16bar
- Port Connection Thread Size : 3/8 in
- Typical Flow Rate : 228.6 SCFM, 6530 L/min
- Integral Check Valve : Without Check Valve
- Port Connection Thread Standard : G
- Minimum Operating Temperature : -20°C
- Maximum Operating Temperature : +50°C
- Overall Width : 55mm
- CODE No.:125-3544
Related product recommendations
You may also be interested in the following products
Electronic/Electrical Parts and Controll Equipments
63-4687-75 Hirose B 2.0 Micro USB Connector Plug, Straight ZX40-B-5S-UNIT(31)
model: 63-4687-75
brand: Hirose
Electronic/Electrical Parts and Controll Equipments
63-7037-66 BSC009NE2LS5ATMA1 N-Channel MOSFET, 100 A, 25 V OptiMOS 5, 8-Pin SuperSO Infineon BSC009NE2LS5ATMA1
model: 63-7037-66
brand: Infineon
Electronic/Electrical Parts and Controll Equipments
63-8097-77 Diodes Inc, 3.6V Zener Diode 3.5% 500 mW SMT 2-Pin SOD-323F DDZ3V6ASF-7
model: 63-8097-77
brand: DiodesZetex
Electronic/Electrical Parts and Controll Equipments
64-0431-94 Dormer 55 mm HSCo End Mill, 13mm Cut Length, 4.5mm Cut Diameter, 4 Flutes C2474.5
model: 64-0431-94
brand: Dormer