Spec

• USB to serial conversion board with USB Type-C connector
• Serial Basic runs at 5 V or 3.3 V, the driver is automatically installed in most operating systems, and the USB Type-C interface is easily available. The CH340C is ***d to convert the serial signal to the USB signal.
• There is a jumper on the back of the board that controls the output voltage of the VCC pin. The default output voltage is 3.3 V, but you can change this jumper to output 5 V.
• Get Started with the USB-C Serial Basic Breakout
• [Reference]
• Schematic
• Eagle Files
• Hookup Guide
• Datasheet (CH340C)
• Drivers
• Windows
• Linux
• Mac
• GitHub