Features

• DIN7985 compliant threads
• This product requires a Pozidriv driver. We have a variety of small head screws of different thread sizes and lengths. For more information, see the datasheet and product summary download file.　If you are looking for something other than A4 (316) stainless steel, we also have steel and brass fasteners. A2 (304) Stainless steel, steel and nickel plated brass Phillips head screws are also available. For more information, see the Fastener Selection Guide.
• Metric Screws - A4 Stainless Steel
• Small screws are full screws that are specifically designed to be ***d in tapped holes or with nuts and washers that fit through holes. Machine screws are available in a variety of configurations, materials, driver head types, and sizes.
• As the name suggests, they are ***d to secure various components in electrical appliances, tools, machinery, electronics, and vehicles among many other things. It is also similar to a bolt, but has a groove hole in the head so you can turn it with a screwdriver.
• Easy to assemble
• our company pan head machine screws allow you to experience ease of assembly.
• In What Situations Are They Used? The pan head Phillips screws are the best solution for securing various parts and components of a machine.
• Features/Advantages
• Excellent corrosion resistance
• Reusable
• Non-magnetic
• Pozidriv, sometimes shortened to Pozi, stands for positive drive
• This head type has a cross recess in the centre with four small indentations around it creating 8 points of contact
• This design provides improved engagement and contact with the screwdriver and prevents ejection force when tightening or loosening the machine screw
• Typical applications
• Light industrial ho***hold electrical appliances
• What are Machine Screws Used For
• Machine screws are designed to hold separate components together ina wide range of applications such as industrial machinery and vehicle engines
• They are screwed through pre- Drilled tapped holes in 2 components and can be fastened at the rear with a nut
• This marine grade 316 steel machine screw is ideal for *** in the following:
• Swimming pools Chemical plants Boat deck fittings Dairy equipment Medical sterilizing equipment Sewage treatment plants
• Frequently Asked Questions
• What Does M2.5, M3, M3.5, M4, M5 Mean
• These measurements are found on metric screws, The 'M' stands for Metric
• The number after the 'M' is the nominal outer diameter of the screw in mm
• How Do I Cut a Machine Screw
• Damage to the machine screw threads can be made Prevent parts from fitting together properly, therefore care has to be taken when cutting them and the correct tools ***d
• Cutting a small machine screw (up to standard size #10 or metric size M5 (5 mm) Use a pair of multipurpose wire strippers or electricians pliers that feature M2.5, M3, M3.5, M4, M5 threaded holes
• These holes are designed for cutting bolts without damaging the thread
• Open the jaws and thread the machine screw into the correct size hole to the distance required
• Squeeze the tool handles closed and the screw will be cut at the point where the two halves of the jaws come together
• You will have a clean cut without any thread damage
• Cutting a large machine screw (larger than size #10 or metric size M5 (5 mm) This is best done using a hacksaw
• Thread the nut on the screw until it reaches the desired point on the head side of the cutting line
• Place the screw ina vice or clamp to keep it secure when cutting and cutting the screw as straight as you can
• When you unthread the nut it will repair and realign any threads that may have been damaged by the saw blade.