
Analyzer, Testing Equipment
62-6177-21 Poly Cap TF75(0.2 μm, Inlet: 3/8"FNPT, Outlet: 3/8"FNPT)1 Pack (5 Pieces) 2702T
Product Description
Product Model: 62-6177-21Product Brand: Cytiva (Whatman […]
Contact Us
Product Details
Product Model: 62-6177-21
Product Brand: Cytiva (Whatman)
Features
- Solvent resistance with PTFE filters
- Recomm***ed for organic solvents and erosive solutions
- Capsule type filters with the smallest pore size (5 types of 0.05, 0.1, 0.2, 0.45, 1.0 μm)
- Sterilization with autoclave or ethylene oxide gas is possible. Integrity testing is possible.
- Note)Only for test and research purposes.
Spec
- Housing: Polypropylene
- Membrane Material: Polytetrafluoroethylene
- vents: inlet side
- Support System: Polypropylene
- Connection Method: Heat Crimping
- Voltage: 0.41 MPa (60psi)
- Filtration direction: with bidirectional support. Only one direction dep***ing on the application due to venting. Reverse filtration is possible only at low pressure.
- Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but *** at the ***r's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
- Effective Filtration Area: 1,000 cm2
- IPA Bubble Point: > 0.09 MPa (13psi)
- Pore Diameter (μm): 0.2
- Connection Inlet: 3/8 "FNPT
- Connection Outlet: 3/8 "FNPT
- FNPT= Female Thread NPT
Related product recommendations
You may also be interested in the following products
62-8393-95 ChIPAb+ EED; 25 assays 17-10034
model: 62-8393-95
brand: Sigma Aldrich Japan(Millipore)
61-0252-35 Opticap XL5 Milligard LPB LPB 0.2μm 9/16In. HB/HB 1/Pk 1ST KWL3A05HH1
model: 61-0252-35
brand: Merck Millipore Corporation
61-0247-25 Opticap XL10 Polygard-CN 10.0μm 1.5In. TC/TC 1/Pk 1ST KN1HA10TT1
model: 61-0247-25
brand: Merck Millipore Corporation