65-8897-46 [Discontinued]Adhesive Load Bond T-III
scannersbarcodereaders

65-8897-46 [Discontinued]Adhesive Load Bond T-III

model: 65-8897-46
brand: SEKISUI

Product Description

Product Model: 65-8897-46Product Brand: SEKISUI Feature […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 65-8897-46
Product Brand: SEKISUI

Features

  • A dedicated bond for lane separation markers (rubber poles) pole cones, road rivets and curb rivets made of Sekisui resin.
  • Mix 2 kinds of main agent and curing agent at a ratio of 1:1.
  • [Applications]
  • Adhesion of sekisui pole cone, road studs and curb studs

Spec

  • Material: Main agent/epoxy resin
  • Curing agent: Modified aliphatic polyamine
  • Caution
  • Avoid construction when it rains or snows.
  • Does not cure below 5°C. Even if it looks like it has hardened, do not *** it as it may ca*** insufficient strength and is dangerous.
  • Please install safety equipment and traffic control staff to ensure safety before construction.
  • Remove dust, moisture, and oil from the joining surfaces of rivets, etc., and clean them thoroughly.
  • Avoid obstructions and uneven surfaces. Or adjust the unland.
  • Please choose a flat place as much as possible.
  • Since this is a 2-liquid type, please mix the main agent (white) and curing agent (black) at a ratio of 1:1.
  • (Mix well until the black and white stripes disappear and the color becomes gray.)
  • It can be ***d for about 20 minutes at 25°C until it hardens.

Related product recommendations

You may also be interested in the following products