
Analyzer, Testing Equipment
61-0255-88 Millidisk Cart 10-Stack 0.22μm Philic 3/Pk 3 x 1ST MCGL10S03
Product Description
Product Model: 61-0255-88Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0255-88
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, cm
2
: 500 - Filter bore diameter, μm: 0.22
- Support material: Polysulfone
- Seal material: Silicone
- Device material: Polysulfone
- Material: Hydrophilic PVDF
- Filter brand name: Durapore(R)
- Brand name: Millidisk
- Main application: Laboratory Filtration
- Package: Double easy open bag
- Form: Stacked disc
- Quantity/box: 3
- Overview: Millidisk cartridge 10-stack 0.22μm, hydrophilicity
- Product name: Millidisk 10 cartridge filter
- Cartridge code: Code M (2-118) O-ring
- Design of stack: 10
-
Bubble point, 23 °C:
345kPa (50 psig) air with water - Maximum input pressure, kPa (psi): Normal direction - 4.1 (60) @ 25 ℃; 1.7 (25) @ 80 ℃; 0.35 (5) @ 123 ℃; reverse direction - 0.7 (10) @ 25 ℃
- Maximum differential pressure, kPa (psid): Normal direction - 414 (60) @ 25 ℃; 172 (25) @ 80 ℃; 34 (5) @ 123 ℃; reverse direction - 69 (10) @ 25 ℃
-
Flow rate, L/min: 15 @ 350
kPa ΔP - Wettability: Hydrophilic
- Sterilization: 5 times of SIP at 135℃ for 60 minutes; 5 times of autoclave sterilization at 126 ℃ for 60 minutes
-
Total extract: The extractables level was equal to or less than 2.5
mg per sterilized device after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: After flushing by following water, comply with USP Oxidizable Substances Test, ?200mL
Related product recommendations
You may also be interested in the following products
61-0191-53 Hand Knobs 3/Pk 3PK XX4304705
model: 61-0191-53
brand: Merck Millipore Corporation
64-1071-01 Flash Column pressure resistance 2.75 MPa or Less ILC-F11-150
model: 64-1071-01
brand: Kiriyama glass Co.
61-0248-71 Opticap XL1 Polygard-Cr 0.5μm 3/4In. TC/TC 1/Pk 1ST KRA5A51FF1
model: 61-0248-71
brand: Merck Millipore Corporation