61-0248-70 Opticap XL10 Polygard-Cr 0.5μm 1.5In. TC/TC 1/Pk 1ST KRA5A10TT1
仕様
- Diameter, cm (inch): 10.7 (4.2)
- Length, Inch (cm): 10 (25)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Vent cap material: Polypropylene
- Material: Polypropylene
- Housing: Polypropylene
- Format: Single Layer
- Brand name: Opticap
- Main application: Laboratory Filtration
- Substitute: KRA501TC1
- Package: Double easy open bag
- Form: Capsule
- Connection, Inlet/outlet: 38mm (1-1/2in.) sanitary flange
- Quantity/box: 1
- Overview: Opticap XL10 Polygard-CR 0.5μm 1-1/2in. TC/TC
- Product name: Opticap XL capsule filter
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
- Nominal bore diameter, μm: 0.5
-
Maximum input pressure, kPa (psi): 552 (80) @ 25
°C; 276 (40) @ 60
°C; 103 (15) @ 80
°C -
Maximum differential pressure, kPa (psid): 483 (70) @ 25
°C - Sterilization: Autoclave sterilization 3 times for 30 minutes at 126℃; no in-line steam sterilization
- Sterility: No sterilization
-
Total extract: The extractables level was equal to or less than 55
mg per capsule after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 5L
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
|
Order No.ASONEs="init">
Listed products : 3 milion products
61-0248-70 Opticap XL10 Polygard-Cr 0.5μm 1.5In. TC/TC 1/Pk 1ST KRA5A10TT1
|
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Order No. | 61-0248-70 | |
|---|---|---|
| Model No. | KRA5A10TT1 | |
| Standard price |
JPY: 56,800 USD: 394.77
Excange rate 1USD= 143.88JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
 |
|
| Supplier Stock |
|
|
