61-0247-80 Opticap XL2 Durapore 0.45μm W/O Pref 1.5In. TC/TC 3/Pk 3 x 1ST KPHLA02TT3
Analyzer, Testing Equipment

61-0247-80 Opticap XL2 Durapore 0.45μm W/O Pref 1.5In. TC/TC 3/Pk 3 x 1ST KPHLA02TT3

model: 61-0247-80
brand: Merck Millipore Corporation

Product Description

Product Model: 61-0247-80Product Brand: Merck Millipore […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 61-0247-80
Product Brand: Merck Millipore Corporation

Spec

  • Filtration area, cm

    2

    : 900
  • Filtration area, m

    2

    : 0.09
  • Filter bore diameter, μm: 0.45
  • Diameter, cm (inch): 14.5 (5.7)
  • Length, Inch (cm): 2 (5)
  • Support material: Polypropylene
  • Seal material: Silicone
  • Device material: Polypropylene
  • Vent cap material: Polypropylene
  • Material: Hydrophilic PVDF
  • Housing: Polypropylene
  • Filter brand name: Durapore(R)
  • Brand name: Opticap
  • Main application: Laboratory Filtration
  • Substitute: SN1M065A4
  • Package: Double easy open bag
  • Form: Capsule
  • Connection, Inlet/outlet: 38mm (1-1/2in.) sanitary flange
  • Quantity/box: 3
  • Overview: Opticap XL2 Durapore 0.45μm without pre-filter 1-1/2in. TC/TC
  • Product name: Opticap XL capsule filter
  • Maximum Inlet Pressure (psig): 80
  • Maximum Inlet Temperature, °C: 25
  • Bubble point, 23 °C:


    193kPa (28 psig) air with water
  • Maximum input pressure, kPa (psi): 552 (80) @ 25


    °C; 276 (40) @ 60


    °C; 103 (15) @ 80


    °C
  • Maximum differential pressure, kPa (psid): Positive direction - 345 (50) at 25℃ (without pre-filter); reverse direction - 345 (50) at 25℃, intermittent
  • Wettability: Hydrophilic
  • Sterilization: Autoclave sterilization 3 times for 60 minutes at 126℃; no in-line steam sterilization
  • Sterility: No sterilization
  • Total extract: The extractables level was equal to or less than 10


    mg per capsule after 24


    hours in water at controlled room temperature.
  • Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 500mL
  • ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.

Related product recommendations

You may also be interested in the following products

61-0205-07 Q-GARD T1 PACK (1/PK) 1ST QGARDT1X1
Analyzer, Testing Equipment

61-0205-07 Q-GARD T1 PACK (1/PK) 1ST QGARDT1X1

model: 61-0205-07 brand: Merck Millipore Corporation
62-8495-71 Anti-phospho-ATM (Ser1981) Antibody, clone 10H11.E12, Ascites Free MAB3806-C
Analyzer, Testing Equipment
62-8371-54 Anti-Ras Antibody, clone RAS10, Alexa Fluor(R) 647 Conjugate 05-516-AF647
Analyzer, Testing Equipment