
Analyzer, Testing Equipment
61-0247-79 Opticap XL2 Durapore 0.45μm W/O Pref 1.5In. TC/HB 3/Pk 3 x 1ST KPHLA02TH3
Product Description
Product Model: 61-0247-79Product Brand: Merck Millipore […]
Contact Us
Product Details
Product Model: 61-0247-79
Product Brand: Merck Millipore Corporation
Spec
-
Filtration area, cm
2
: 900 -
Filtration area, m
2
: 0.09 - Filter bore diameter, μm: 0.45
- Diameter, cm (inch): 14.5 (5.7)
- Length, Inch (cm): 2 (5)
- Support material: Polypropylene
- Seal material: Silicone
- Device material: Polypropylene
- Vent cap material: Polypropylene
- Material: Hydrophilic PVDF
- Housing: Polypropylene
- Filter brand name: Durapore(R)
- Brand name: Opticap
- Main application: Laboratory Filtration
- Package: Double easy open bag
- Form: Capsule
- Connection, Inlet/outlet: 38mm (1-1/2in.) sanitary flange/14mm (9/16in.) hose port
- Quantity/box: 3
- Overview: Opticap XL2 Durapore 0.45μm without pre-filter TC/HB
- Product name: Opticap XL capsule filter
- Maximum Inlet Pressure (psig): 80
- Maximum Inlet Temperature, °C: 25
-
Bubble point, 23 °C:
193kPa (28 psig) air with water -
Maximum input pressure, kPa (psi): 552 (80) @ 25
°C; 276 (40) @ 60
°C; 103 (15) @ 80
°C - Maximum differential pressure, kPa (psid): Positive direction - 345 (50) at 25℃ (without pre-filter); reverse direction - 345 (50) at 25℃, intermittent
- Wettability: Hydrophilic
- Sterilization: Autoclave sterilization 3 times for 60 minutes at 126℃; no in-line steam sterilization
- Sterility: No sterilization
-
Total extract: The extractables level was equal to or less than 10
mg per capsule after 24
hours in water at controlled room temperature. - Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 500mL
- ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.
Related product recommendations
You may also be interested in the following products
61-0256-60 Millistak+(R) Micropod DE750 23cm2 Luer Fittings; 3/Pk 3 x 1ST MDE7523CL3
model: 61-0256-60
brand: Merck Millipore Corporation
62-8530-44 EmbryoMax(R) Primary Mo*** Embryo Fibroblasts,Hygro Resistant,Strain C57/BL6, passage 3; 5 vials PMEF-H
model: 62-8530-44
brand: Sigma Aldrich Japan(Millipore)
62-8386-94 anti-phospho-PTEN (Ser370); 100 μL 07-889
model: 62-8386-94
brand: Sigma Aldrich Japan(Millipore)