laboratoryinstruments
1-423-02-22 Cool Incubator 130L With Pre-Shipment Inspection Certificate KMH-130
Product Description
Product Model: 1-423-02-22Product Brand: AS ONE Corpora […]
Contact Us
Product Details
Product Model: 1-423-02-22
Product Brand: AS ONE Corporation
Features
- Cool quickly to -15 C.
- No cleaning or waste water treatment (drain outlet, drain tank, etc.) is required.
- A digital display and buzzer will inform you when the temperature is abnormal.
- The temperature setting can be finely adjusted in 0.5 degree increments. In addition, the temperature range around 37 degrees Celsius (35~40 degrees Celsius) can be set in 0.1 degree increments.
- It has a measuring hole inside.
Spec
- Capacity (L): 130
- Inner dimensions (mm): 620 x 340 x 584
- Outer dimensions (mm): 700 x 502 (569) x 1107
- Material: Exterior/Plastic baked paint steel sheet, Interior/Stainless steel sheet
- Temperature settings range: 15 to + 50 °C
- Compressor output: 175W
- Refrigerant: R -134 a
- Temperature accuracy: +/1.5 °C (Setting: 5.0 °C, no load) when the refrigerator is ON/OFF controlled, +/0.5 °C (Setting: 37.0 °C, no load) when the heater is proportional controlled.
- Temperature distribution: ±0.5 °C (Set temperature: 37.0 °C, ambient temperature: 20 °C, no load)
- Circulation method: Lower back (Callout) ⇒ Upper back (suction)
- Frost removal method: Heater defrost method (microcomputer control)
- Function: 8 steps, 2 patterns
- Alarm function: door alarm, temperature abnormality, sensor abnormality, over rise prevention, earth leakage breaker
- Operation mode: -
- Power supply: AC100V/50/60Hz/15 A
- Power cord length: 3 m
- Power supply plug : 3P plug with ground (L)
- Maximum Power Consumption (50/60Hz): 430/440
- Weight: about 70kg
- Number of shelf board: 2 pieces
- Internal lighting: fluorescent lamps 15W
- Leg part: Free caster, adjustable feet included
- Measurement hole: φ40mm, silicone rubber plug
- Accessories: Inspection and inspection documents
- *Products with inspection certificate is a service to issue inspection certificate after inspection by control and electric engineer at the time of shipment.
- *IQ/OQ service is available for a fee.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
laboratoryinstruments
65-0564-03 One-Touch Connectors (2-Piece Pack)
model: 65-0564-03
brand: TOKYO RIKAKIKAI CO., LTD.
laboratoryinstruments
63-8458-02 Platform for 2L Lauber Thomson Flask Clamp S44I040010
model: 63-8458-02
brand: Eppendorf AG
laboratoryinstruments
1-5807-11 Constant Temperature Water Circulator Heating Device HC-80
model: 1-5807-11
brand: AS ONE Corporation