Spec

• Filtration area, m
  
  ²
  
  : 0.92
• Diameter, cm (inch): 7.1 (2.8)
• Length, Inch (cm): 20 (50)
• Support material: Spun bonded polypropylene
• Seal material: Silicone
• Device material: Polypropylene
• Pre-filter material: Borosilicate glass Fiber
• Material: Cellulose mixed ester
• Code: Code 0
• Format: Double Layer
• Brand name: Polysep
• Main application: Laboratory Filtration
• Package: Double easy open bag
• Form: Cartridge
• Quantity/box: 3
• Overview: Polysep II cartridge filter 20 in. 2.0/1.2μm code 0
• Product name: Polysep II cartridge Filter
• Cartridge code: Code 0 (2-222) O-ring
• Nominal bore diameter, μm: 2,0 / 1,2
• Maximum input pressure, kPa (psi): 3.5 (50) @ 25
  
  
  °C
• Maximum differential pressure, kPa (psid): 345 (50) @ 25
  
  
  °C
• Sterilization: 30
  
  
  minutes heat water sterilization at 80
  
  
  ℃
• Sterilization: Autoclave sterilization or SIP sterilization of 121° for 30 minutes 10 times
• Total extract: The extractables level was equal to or less than 140
  
  
  mg per 10-inch cartridge after 24
  
  
  hours in water at controlled room temperature.
• Potassium permanganate reduced substance: Will meet the USP Oxidizable Substances Test requirements after a water flush of ? 10L
• ※We ask for your kind understanding that lead time might change If it is out of stock in Japan.