scannersbarcodereaders
68-1348-23 Adhesive Load Bond M
Product Description
Product Model: 68-1348-23Product Brand: SEKISUI Feature […]
Contact Us
Product Details
Product Model: 68-1348-23
Product Brand: SEKISUI
Features
- A dedicated bond for lane separation markers (rubber poles) pole cones, road rivets and curb rivets made of Sekisui resin.
- Mix 2 kinds of main agent and curing agent at a ratio of 1:1.
- Since this is a 2-liquid type, please mix the main agent (white) and curing agent (black) at a ratio of 1:1. (Mix well until the black and white stripes disappear and the color becomes gray.)
- It can be ***d for about 20 minutes at 25°C until it hardens.
Spec
- Material: Main agent/epoxy resin, curing agent/modified aliphatic polyamine
- Application: Adhesion of sekisui pole cone, road studs and curb studs
- [Note]
- *Avoid construction when it rains or snows.
- *It will not cure at 5°C or lower. Even if it looks like it has cured, do not *** it as it may ca*** insufficient strength and is dangerous.
- *Please install safety equipment and traffic control staff to ensure safety before construction.
- *Remove dust, moisture, and oil from the joining surfaces of rivets, etc., and clean them thoroughly.
- *Avoid places with obstacles and uneven road surfaces, or adjust the uneven ground.
- *Please choose a flat place as much as possible.
Related product recommendations
You may also be interested in the following products
65-1692-94 [Discontinued]Technora ® Heat Resistant Cut Resistant Gloves (5-Finger Gloves) 25 cm with Palm EGF2
model: 65-1692-94
brand: Teiken Limited
61-8149-08 [Discontinued]JIS Standard Sticker, Fireproof, Synthetic Paper, 300 x 200 37877
model: 61-8149-08
brand: UNIT SAFETY SIGNS CO., LTD.
63-8455-90 【Custom-made】Antistatic (clean) Fabric
model: 63-8455-90
brand: AS ONE Corporation
62-6157-08 JIS Piping Identification Direction Display Sticker Direction Display White (Medium) 1 Set (10 Sheets) AS-23-13L
model: 62-6157-08
brand: UNIT SAFETY SIGNS CO., LTD.