Spec

• Flow rate ranges: 9 ~ 160 mL/h (inner diameter 1.15 x outer diameter 3.2 mm tube), 30 ~ 507 mL/h (inner diameter 2.15 x outer diameter 4.2 mm tube), 51 ~ 900 mL/h (inner diameter 3.15 x outer diameter 5.2 mm tube)
• Performance:
• Flow rate accuracy: within +/- 2% (repeatability: within +/- 1%)
• Discharge pressure: about 196 kPa (2.0 kg/cm 2)
• Liquid viscosity/temperature: Max. 2 Pa/s (2000 cP) - 10 ~ 100 degrees C (non-freezing)
• Rotating speed: continuously variable, continuously variable, 2 ~ 36 rpm
• Features:
• rotation settings: volume settings
• Liquid feeding direction: Forward/reverse switchable
• Configuration:
• Motor: Induction motor output 2W
• Number of pieces for tube case: 1 step (made of PPS resin)
• Standard:
• Number of tubes: 1 piece/1 step
• Usable tube materials: Silicon, Pharmed ®, Tygon ®, Versilon (Fullan ®)
• Usable tube diameter: inner diameter 1.15 x outer diameter 3.2 mm, inner diameter 2.15 x outer diameter 4.2 mm, inner diameter 3.15 x outer diameter 5.2 mm
• Operating ambient temperature range: 5 ~ 35 degrees C
• External dimensions (mm)/Mass: 73 W x 169 D x 78 H/1.0 kg
• Power input/voltage: 0.1 A, 10 VA/AC 100 V 50/60 Hz
• *Performance is measured at room temperature of 25 degrees Celsius, rated power supply voltage of 50 Hz, water, liquid temperature of 21 degrees Celsius, back pressure of 0 and specified silicon tubing.
• *If the viscosity of the liquid ***d exceeds 0.1 Pa s (100 cP), the discharge may decrease.
• *The operating fluid temperature of the Tygon ® tube is 0 ~ 70 degrees Celsius.
• *Tubes sold separately. Flow rate, flow rate accuracy, discharge pressure, etc. may vary slightly dep***ing on the material of the tube ***d.
• Power plug, power cord and wiring material are not included.
• Code: 124820