laboratoryinstruments
65-0583-70 ［Discontinued］Constant flow pump Cassette tube pump SMP-21S
Product Description
Product Model: 65-0583-70Product Brand: TOKYO RIKAKIKAI […]
Contact Us
Product Details
Product Model: 65-0583-70
Product Brand: TOKYO RIKAKIKAI CO., LTD.
Features
- Compact and Suitable for Various Liquid Feeding
- S Type Comfortable Preparation with Rapid Switch
- Uses cassette tube case for easy tube replacement.
- It is suitable for sampling, etc., and can be rotated forward or backward by switching the switch.
- The tube can be selected from four types dep***ing on the liquid ***d: silicon, Farmed ®, Tygon ®, and Versilon (full run ®). Silicon, Furmed ® and Versilon (Flurane ®) tubes can be sterilized by autoclaving.
- There is no contact with the metal part beca*** the contact part is only the tube, so there is no risk of liquid contamination.
- Since the discharge pressure is 196 kPa (2.0 kg/cm2), the liquid can be delivered to high positions.
- Since the SMP-21S has an external signal input terminal, it can receive electrical signals (0 ~10 V DC) from a personal computer or various measuring devices and control the amount of discharge. You can automate the injection system for reagents, etc.
- The SMP-21S type is equipped with a rapid switch that allows the maximum discharge amount to be achieved while the flow control knob is fixed, allowing the liquid to be filled in a short time in the tube path up to the point just before the feed partner.
Spec
- Flow rate ranges: 9 ~ 160 mL/h (inner diameter 1.15 x outer diameter 3.2 mm tube), 30 ~ 507 mL/h (inner diameter 2.15 x outer diameter 4.2 mm tube), 51 ~ 900 mL/h (inner diameter 3.15 x outer diameter 5.2 mm tube)
- Performance:
- Flow rate accuracy: within +/- 2% (repeatability: within +/- 1%)
- Discharge pressure: Max. 196 kPa (2.0 kg/cm 2)
- Liquid viscosity/temperature: Max. 2 Pa/s (2000 cP) - 10 ~ 100 degrees C (non-freezing)
- Rotating speed: continuously variable, continuously variable, 2 ~ 36 rpm
- Features:
- rotation control: feedback control
- rotation settings: volume settings
- Liquid feeding direction: Forward/reverse switchable
- Rapid function: On
- External input/output: External signal input jack (DC 0 ~ 10 V)
- Configuration:
- Motor: Induction motor output 2W
- Tube case: 1 (made of PPS resin)
- Standard:
- Number of tubes: 1 piece/1 step
- Usable tube materials: Silicon, Pharmed ®, Tygon ®, Versilon (Fullan ®)
- Usable tube diameter: inner diameter 1.15 x outer diameter 3.2 mm, inner diameter 2.15 x outer diameter 4.2 mm, inner diameter 3.15 x outer diameter 5.2 mm
- Operating ambient temperature range: 5 ~ 35 degrees C
- External Dimensions (mm)/Mass: 73 W x 188 (208) D x 121 (144) H/2.5 kg
- Power input/voltage: 0.1 A, 10 VA/AC 100 V 50/60 Hz
- *Performance is measured at room temperature of 25 degrees Celsius, rated power supply voltage of 50 Hz, water, liquid temperature of 21 degrees Celsius, back pressure of 0 and specified silicon tubing.
- *Tubes sold separately. Performance such as flow rate and discharge pressure varies slightly dep***ing on the tube ***d.
- *If the viscosity of the liquid ***d exceeds 0.1 Pa s (100 cP), the discharge may decrease.
- *The operating fluid temperature of the Tygon ® tube is 0 ~ 70 degrees Celsius.
- *Dimensions in parentheses include projections.
- Code: 124760
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
![64-3424-28 Silicon Rubber Heater [With Double-sided Tape, Thermocouple 1m, Lead Wire Extension 1m] 100V 500W 250mm x 250mm SR100-500-250-250-P-K1](https://www.jgauge.com/wp-content/uploads/2025/06/dc9f5816023ca2db7bfbc3bfd4acc690.webp)
laboratoryinstruments
laboratoryinstruments
laboratoryinstruments