64-1202-80 [Discontinued]Housing 1PP-2-FV-000 43024000
laboratoryinstruments

64-1202-80 [Discontinued]Housing 1PP-2-FV-000 43024000

model: 64-1202-80
brand: ADVANTEC

Product Description

Product Model: 64-1202-80Product Brand: ADVANTEC Featur […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 64-1202-80
Product Brand: ADVANTEC

Features

  • Plastic housing for one piece consisting of head and torso.
  • High-purity polypropylene, free of fillers and colorants, rarely elutes from the housing and can be ***d to filter high-purity chemicals and ultrapure water.
  • Since the inner surface of the housing is smooth, the retention and adhesion of fine particles and microorganisms are unlikely, and the sanitary property is excellent.
  • 1PP type is available for 250 mm filter size type and 500 mm filter size type. You can select models that can support cartridge filter shape codes C, F (flat gasket DOE), TCW type and M, H (222 O-ring SOE).

Spec

  • Number of Cartridges: 500 mm x 1 piece
  • Applicable Cartridge Filter Shape Codes: C, F (Flat Gasket DOE) and TCW Type
  • IN/OUT Shape: 3/4 "PTF (3/4" with PT Nipple)
  • Dimensions : overall height ( mm )/340 , full width/200 mm
  • maximum working pressure: 0.49 MPa (25 °C), 0.19 MPa (60 °C)
  • Maximum operating temperature: 60 °C
  • material: Head/Polypropylene, Trunk/Polypropylene, O-Ring/FPM, Vent/SUS304 (Push Button Type/Standard), Adapter/Polypropylene, Adapter Spring/SUS304 (Standard), 3/4 "PT Nipple/Polypropylene
  • Mass (kg): 0.84
  • Pressure gauge: none (typical)
  • *1PP type cannot be ***d for gas filtration.
  • *Wrap the sealing tape around the piping taper screw.
  • *This product ***s plastic, so it will deteriorate over time.
  • *The degree of deterioration varies dep***ing on the temperature, pressure, and chemical history of the operating conditions. If any abnormalities are found, replace the product with a new one or replace parts sold separately.
  • *Do not connect metal piping directly to the head.
  • *Do not tighten the vent plug or drain plug with a tool such as monkey wrench.

Related product recommendations

You may also be interested in the following products

62-2934-11 Micro Tip with Rack, Sterilized, PP, 10 μL 522100 522100
laboratoryinstruments
65-6829-48 Glass Joint 3-Matsu 15/25 1782-01-1
laboratoryinstruments
64-1193-90 Compact Cartridge Filter MCG-1-C10S 40121101
laboratoryinstruments
2-8102-14 Drying Bottle Cap 1 Pc -
laboratoryinstruments

2-8102-14 Drying Bottle Cap 1 Pc -

model: 2-8102-14 brand: AS ONE Corporation