laboratoryinstruments
61-3733-84 ［Discontinued］Super Stat Mini PID Cooling Circulator 3521215
Product Description
Product Model: 61-3733-84Product Brand: ATTO CORPORATIO […]
Contact Us
Product Details
Product Model: 61-3733-84
Product Brand: ATTO CORPORATION
Features
- Wide range of operating temperatures from -20°C to +80°C
- Energy-saving temperature control with digital PID control High temperature adjustment accuracy (±0.05~0.1°C)
- Constant temperature water bath and pump enable external circulation of constant water temperature (for closed systems)
- Equipped with safety mechanisms such as earth-leakage/overcurrent breaker, water level sensor, and overheat prevention alarm
Spec
- Operating temperature range: -20℃ to +80℃
- Temperature control accuracy: ±0.05℃ - 0.1℃, lowest setting unit 0.1℃
- Temperature display: Digital display (setting temperature, measurement temperature simultaneous display)
- Temperature control: Digital PID control (P: Proportional control, I: Integration control, D: Differentiation control)
- Heater: 500W (SUS spiral sheathed heater)
- Refrigerating machine: Brushless DC Inverter method 270W
- Refrigerant: R134a (HFC hydrofluorocarbon: Alternative CFC) 160g
- Cooling capacity: 550W (473kcal/hat 24℃) 50Hz
- Circulation pump capacity: Maximum flow rate: 4L/min (50Hz) maximum head: 3.5m magnet seal pump
- Stirrer pump: Induction motor/screw stirrer
- Circulation nozzle: 360° rotation L-shaped type nozzle outer diameter Φ10.6mm (hose inner diameter Φ8 - 10mm is available)
- Water tank dimensions, capacity: 150mm (W) x 120mm (D) x 150mm (H) about 3.5L
- Safety mechanism: Electrical leakage/overcurrent breaker, No-water burning prevention, upper/lower water level float sensor, Compressor overheating prevention device, Compressor protection circuit
- Available for option: Flow rate sensor, Flow monitor, Conveying water amount adjusting valve, Strainer
- Material: Water tank SUS, Neoprene piping neoprene, Yellow copper cooling coil copper
- Heater SUS circulation pump yellow copper float SUS, Polypropylene
- Exterior SPC melamine baking coating
- Environmental temperature/humidity: From 0℃ to +30℃ relative humidity 85% or lower (no condensation)
- Power supply: AC100V50/60Hz Max approx.8.5A
- Dimensions, mass: 198mm (W) x 431mm (D) x 436mm (H) about 22kg
- Standard accessories: Insulation hose (2 volume), Drainage hose, Instruction manual:
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
laboratoryinstruments
laboratoryinstruments
61-9092-91 VAN Metal Blood Transfusion Needle Thick (Gauge 18G Lock Type Needle Tip 15°) RB 1036302
model: 61-9092-91
brand: TSUBASA INDUSTRY CO., LTD.
laboratoryinstruments
62-2320-08 Test Sieve SUS Utility Model φ 200 mm, Depth 45 mm, Mesh Opening 5.60 mm, with Calibration Certification
model: 62-2320-08
brand: SIEVE FACTORY IIDA CO., LTD.