Spec

• Electrophoresis column Size: for scratchbuild gel, Ready-made gel (agar gel series)
• Outer diameter φ7mm x 75mm (for compact), Outer diameter φ7mm x 100mm (for mini size)
• Gel size: φ2.5mm x 50mm (for compact), φ2.5mm x 75mm (for mini size)
• Number of simultaneous electrophoresis gels: Maximum 8
• Electrophoresis column install system: Silicone packing insertion system
• Electrophoresis column constant temperature system: Constant temperature by lower electrode solution
• Electrode solution capacity: Top 40mL bottom 550mL
• Power: Selection of setting following mode with the select button, Timer dial
• Timer 0 - 999min
• Display timer setting time, Remaining time, Mode lighting, Lighting during energization
• Safety function open detection/short detection
• When alarm output stops, When time is up, When errors detected
• Transition to low power consumption mode 10 seconds after eco mode start
• Output mode: Constant voltage 50/100/300V step-up/constant mode (selected the left, programed)
• Current - 30mA maximum 12W
• AC adapter: Input: 100 - 240V supported output: 24VDC/1A
• Electrophoresis tank polarity: Select when a power unit is connected
• Safety measures: Power-integrated safety cover, Open error/short error detection
• Main materials: Power unit ABS (case), Electrophoresis tank polycarbonate, Acrylic, Silicone
• Body dimensions, mass: Electrophoresis tank: 164mm (W) x 94mm (D) x 193mm (H) (when a power unit is installed, excluding AC adapters, projections)
• 0.81kg (excluding AC adapters, electrophoresis columns, etc.)
• Power supply: 100 - 240V 50/60Hz
• Standard components: Body (lower electrophoresis tank, upper electrophoresis tank, Silicone packing 8 pieces, Power unit, AC adapter, extension cord),
• Silicone valve 7 pieces, Gel carrier, Mini, compact gel tray, Instruction manual: