Spec

• Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
• Validate (FAT) before shipping.
• After receiving the order, a FAT instruction form (plan) is sent to the ***r, and after the signature is returned, the FAT is performed.
• App***ix: FAT report/Calibration Certificate of ***d measuring instrument copied
• *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
• Temperature point: 10 degrees C 1 point, liquid pressure gauge and flow meter required
• Cooling/Circulation System: Air Cooled/Sealed System Directional Circulation
• Type of liquid ***d: tap water, ethylene glycol, etc.
• Temperature setting range: - 15 to + 30 degrees C (without heater)
• Temperature control accuracy: +/- 1.0 degrees C
• Cooling capacity (at 25 degrees C): 10 degrees C, about 460 W/at liquid temperature - 10 degrees C, about 110 W
• Maximum flow: About 12 L
• Maximum head: about 8 m
• Temperature control: hot gas bypass control
• Temperature setting and display: TouchScreen input, digital display, minimum digit 0.1 degrees Celsius
• Safety functions: Leakage/overcurrent breaker, delay Timer for refrigerator protection, water level sensor, refrigerator overload relay protection function, temperature upper/lower limit alarm function
• External input/output: None
• Refrigerator/Refrigerant: Air-cooled 360 W/R -134 a
• Heat Exchanger: SUS 316 L, SUS 304 Blazing Plate Heat Exchanger
• External circulation nozzle: Metal nozzle with outer diameter of 10 mm (inside diameter of compatible tube of 8 ~ 9 mm)
• Water tank material: SUS 304, 236 x 150 x 143 mm, approx. 5.0 L (liquid volume approx. 4.2 L)
• Dimensions: 212 x 482 x 637 mm
• Operating ambient temperature range: 5 ~ 30 degrees C
• Mass: 30 kg
• Power supply voltage: 100 VAC 50/60 Hz
• *Room temperature: 20 degrees Celsius/Circulation: Maximum/Power: 100 VAC, 60 Hz This is the capacity value under no load.
• *If you would like to request a local IQOQ, please contact us separately. We will need your installation address for the estimate.