laboratoryinstruments
1-1646-01-28 Program Electric Furnace 270 x 275 x 375 mm with Pre-shipment Validation SMF-1
Product Description
Product Model: 1-1646-01-28Product Brand: AS ONE Corpor […]
Contact Us
Product Details
Product Model: 1-1646-01-28
Product Brand: AS ONE Corporation
Features
- With a maximum temperature of 1000°C and a high temperature rise speed, it can be widely ***d for material testing and heat treatment.
- Up to 8 patterns of 16 step programs can be set, and the temperature rise rate can also be set.
- In addition to the automatic over-rise prevention function linked to the set temperature, it comes with a completely indep***ent over-rise prevention function that allows you to set any temperature.
Spec
- Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
- Validate (FAT) before shipping.
- After receiving the order, a FAT instruction form (plan) is sent to the ***r, and after the signature is returned, the FAT is performed.
- App***ix: FAT report/Calibration Certificate of ***d measuring instrument copied
- *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
- Temperature point: 1 point of 800 degrees Celsius
- External dimensions (mm): 270 x 275 x 375
- Inner furnace dimensions (mm): 120 x 150 x 100 (including sensor protrusions)
- Storage capacity (L): 2.1
- Temperature setting range: 100 ~ 1000 degrees Celsius (normal: 900 degrees Celsius)
- Temperature control method: PID control
- Sensors: Two K thermocouples
- Program functions: 16 steps and 8 patterns
- Timer function: Auto Start/Auto Stop/SV Start ON/OFF Timer
- Setting units: Temperature/1 °Celsius, Time/1 minute
- Maximum temperature reach time: approximately 45 minutes
- Exterior: Steel paint
- Interior: Ceramic Fiber
- Heater (4 heaters, top, bottom, left and right): 900 W
- Safety device: Indep***ent overrise prevention function/Overcurrent breaker/burnout mechanism (Heater OFF when sensor is disconnected)
- Power supply: 100 VAC 50/60 Hz
- Power cord length: 2 m (3P plug)
- Weight: approximately 10 kg
- This product can be inspected and inspected. Please contact us.
- *Inspection Certificate service is a service that carries out inspections of the control relation (measured temperature inside the wareho***, etc.) and the power engine personnel at the time of shipment or at the customer's site, and issues inspection documents.
- *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
1-9005-41-28 Incubator (stainless steel type) with Pre-shipment Validation SIW-300SB
model: 1-9005-41-28
brand: AS ONE Corporation
laboratoryinstruments
laboratoryinstruments
61-9592-54 Volumetric Pipette 0.1mL With Test Results Document
model: 61-9592-54
brand: AS ONE Corporation
laboratoryinstruments
2-8067-13 Shaft Generator HT-1018 10 - 1000mL HT-1018
model: 2-8067-13
brand: AS ONE Corporation