laboratoryinstruments
1-2935-01 ［Discontinued］Cool Incubator (ETTAS) CIW-450
Product Description
Product Model: 1-2935-01Product Brand: AS ONE Corporati […]
Contact Us
Product Details
Product Model: 1-2935-01
Product Brand: AS ONE Corporation
Features
- The *** of inverter compressors has resulted in energy savings of only 40 W when reaching 4°C.
- Space-saving design with only 65 cm height even with 90 L content.
- The air volume of the circulating fan is adjusted around the set temperature to suppress drying of the medium.
- There is little overshoot and undershoot, and no hunting after reaching the set temperature.
- Energy-saving and space-saving, the height is only 195 cm even when stacked on 3 levels. The *** of an inverter-controlled compressor significantly reduces power consumption (60 W during cooling operation).
Spec
- Model number: CIW-450
- External dimensions: 565 x 636 x 651mm
- Internal dimensions: 450 x 430 x 450mm
- Convective system: Forced convection system (air volume automatic control system)
- Effective capacity: Approximately 90L
- Temperature settings range: 2 - 60℃ (by 0.1℃)
- Temperature distribution width: +/- 0.5℃ (37℃ when setting)
- Ambient temperature range: 10 - 30℃ (When you *** it at the setting temperature of 10℃ or less, make sure you set the room temperature to 25℃ or less.)
- Program feature (Body only): Maximum 2 steps, setting range per 1 step: 1 minute - 99 hours 59 minutes, Or no time settings
- Refrigerating machine: DC inverter compressor 80W
- Cooling capacity: 150W
- Heater capacity: 260W
- Maximum power consumption: 320W (when operating heater and compressor simultaneously) (Until it reaches to the setting temperature of 15 - 35℃. Approximately 100W after it reaches to the setting temperature)
- Power supply: 100VAC 50/60Hz 350VA, 1.9m 3P plug (with 3P2P conversion plug)
- Safety device: Indep***ent excessive temperature rise and cooling prevention function, Electrical leakage breaker, F***, Overheating prevention thermostat
- Measurement port: φ54mm x 1 piece (Body right)
- Shelf pitch, number of steps: 35mm, 10 steps
- Material: Body/Steel, Chamber/stainless steel, Internal transparent door/Polyethylene terephthalate (PET)
- Weight: 45kg
- Accessories: Shelf board 2 boards
- ETTAS
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
1-8993-12-22 Hyper Stirrer System DxII with small Pre-shipment Inspection Certificate for low to ultra-high viscosity liquids HVDN-S
model: 1-8993-12-22
brand: AS ONE Corporation
laboratoryinstruments
65-6864-14 Gas Introduction Pipe for Semi/Micro 6 x 150 Straight Pipe 2645-01
model: 65-6864-14
brand: VIDTEC
laboratoryinstruments
63-1292-46 Jumbo Syringe 500 mL 500MAR-LL-GT Replacement Luer Lock 009910
model: 63-1292-46
brand: SGE Analytical Science
laboratoryinstruments