laboratoryinstruments
63-1396-10 Thermostatic chamber for shaking machine FMS-100
Product Description
Product Model: 63-1396-10Product Brand: TOKYO RIKAKIKAI […]
Contact Us
Product Details
Product Model: 63-1396-10
Product Brand: TOKYO RIKAKIKAI CO., LTD.
Features
- Chamber Compatible with Shaking at Constant Temperature
- This thermostatic chamber can be ***d as a thermostatic shaker by installing an open type shaker. It can be ***d as an incubator without installing a shaker.
- A shaker of up to 400 x 340 mm can be installed in the cabinet.
- Erlenmeyer flasks up to 2L can be ***d.
Spec
- Forced convection system
- Temperature adjustment range: room temperature + 5 ~ 50 degrees C
- Temperature control accuracy: +/- 0.2 degrees C
- Temperature distribution accuracy: +/- 1.5 degrees C
- Temperature control system/Temperature sensor: P.I.D control/Platinum measurement resistor Pt 100 ohm
- Temperature setting system: sheet key input/digital display
- Safety features: Leakage/overcurrent breaker, overheat prevention thermostat, door switch, f*** (for service outlet), temperature controller safety device (Sensor disconnect/short circuit, upper temperature warning)
- Heater: Stainless steel sheath heater 600 W
- Interior dimensions: 425 x 430 x 490 mm
- Installable shaker dimensions: Up to 400 x 340 mm
- Internal Effective Height: 470 mm
- Internal outlet: 1, Max. 2A
- Cable hole: inner diameter 36 mm
- Shelf: Interior space installation type (optional)
- Operating ambient temperature range: 5 ~ 35 degrees C
- External dimensions: 610 x 540 x 610 mm
- Weight: 45 kg
- Power input/voltage: 6.2 A/100 VAC 50/60 Hz
- *Performance is based on room temperature of 20 degrees Celsius, rated supply voltage, 50 Hz and 37 degrees Celsius setting.
- Code: 191060
*This product might require extra fees.
Related product recommendations
You may also be interested in the following products
laboratoryinstruments
65-0566-53 ［Discontinued］Vacuum controller for large concentrators NVC-2200L
model: 65-0566-53
brand: TOKYO RIKAKIKAI CO., LTD.
laboratoryinstruments
61-4698-40 300 x 60 Lid, Receiving Container for Stainless Sieve
model: 61-4698-40
brand: SANPO
laboratoryinstruments
1-7578-01 Mini Air Pump Suction-Discharge Convertible Type EAP-01
model: 1-7578-01
brand: AS ONE Corporation
laboratoryinstruments
61-3591-27 Foot switch For Dispenser, 2 Pin Connector FS/W-2-1602P
model: 61-3591-27
brand: Musashi engineering CO., LTD.