63-1396-08 Low temperature chamber for shaker FMC-100
laboratoryinstruments

63-1396-08 Low temperature chamber for shaker FMC-100

model: 63-1396-08
brand: TOKYO RIKAKIKAI CO., LTD.

Product Description

Product Model: 63-1396-08Product Brand: TOKYO RIKAKIKAI […]

Contact Us

Hotline

18866622123

WeChat

WeChat ID: 18866622123

WeChat QR Code

Product Details

Product Model: 63-1396-08
Product Brand: TOKYO RIKAKIKAI CO., LTD.

Features

  • Low temperature constant temperature chamber with built-in refrigerator and program operation
  • Open type shaker can be installed and ***d as low temperature constant temperature shaker. It can be ***d up to the main culture of a large Erlenmeyer flask from a pre-culture using a centrifuge tube. It can be ***d as an incubator without installing a shaker.
  • Since it is equipped with a small powerful refrigerator, stable temperature can be obtained in the range of 4~50°C. A shaker is installed in the wareho*** and can be ***d for shaking culture from low temperature to constant temperature.

Spec

  • Forced convection system
  • Temperature adjustment range: 4 ~ 50 degrees C
  • Temperature control accuracy: +/- 0.2 degrees C
  • Temperature distribution accuracy: +/- 1.4 degrees C
  • Temperature control system/Temperature sensor: Refrigerator + microcomputer P.I.D control/Platinum temperature measuring resistor Pt 100 ohm
  • Temperature setting system: sheet key input/digital display
  • Programs: Step, Autostart Stop
  • Safety features: Leakage/overcurrent breaker, overheat prevention thermostat, door switch, f*** (for service outlet), temperature controller safety device (Sensor disconnect/short circuit, upper temperature warning)
  • Heater: Stainless steel sheath heater 600 W
  • Refrigerator/Refrigerant: Air-cooled 160 W/R 134 a
  • Interior dimensions: 425 x 430 x 455 mm
  • Installable shaker dimensions: Up to 400 x 340 mm
  • Internal Effective Height: 455 mm
  • Internal outlet: 1, Max. 2A (temperature controller interlocking)
  • Cable hole: inner diameter 36 mm
  • Shelf: Interior space installation type (optional)
  • Fluorescent: 10 W internal overhead type (optional)
  • Operating ambient temperature range: 5 ~ 35 degrees C
  • External dimensions: 495 x 585 x 810 mm
  • Weight: approximately 74 kg
  • Power input/voltage: 9.3 A/100 VAC 50/60 Hz
  • *Performance is based on room temperature of 20 degrees Celsius, rated power supply voltage, 50 Hz, and 16 and 37 degrees Celsius settings.
  • *The maximum shakable speed is 400 rpm.
  • Code: 195240

Related product recommendations

You may also be interested in the following products

63-1395-22 Solvent recovery unit for concentrators DPE-1250D
laboratoryinstruments

63-1395-22 Solvent recovery unit for concentrators DPE-1250D

model: 63-1395-22 brand: TOKYO RIKAKIKAI CO., LTD.
1-9762-02 Steel Ball 5.0mm 1kg -
laboratoryinstruments
1-5917-21-22 Ultra Stirrer with Analog Pre-shipment Inspection Certificate MSA-1N
laboratoryinstruments
1-9963-01 Hand Dispenser 250mL Dispensing Capacity 25 1475
laboratoryinstruments