 
                                                                
                                    
                                        laboratoryinstruments                                    
                                
                                                            63-1238-72 High-temperature dryer DRD360DB
Product Description
Product Model: 63-1238-72Product Brand: ADVANTEC Featur […]
Contact Us
Product Details
Product Model: 63-1238-72
Product Brand: ADVANTEC
   Features
  
- A small natural convection dryer that can be ***d up to 650°C.
- The temperature can be set in a wide range of temperatures from [Room temperature +50°C] to 650°C.
- A dedicated cooling fan is built in to keep the exterior surface temperature low even during high temperature operation.
   Spec
  
- convection formula : natural convection type
- Operating temperature range: R.T. + 50 °C, to 650 °C
- Temperature Adjustment Precision: ± 2 °C at 650 °C
- Temperature distribution precision: ± 25 °C at 650 °C
- Temperature rise time: about 120 minutes, from R.T. to 650 °C
- Ambient operating temperature: 5 °C, to 35 °C
- temperature controller: Microcomputer PID Control (TC-SVI System)
- Operation type: Standard Operation, Program Operation (maximum 100 steps) 1 minute, to 99 hours 59 minutes
- Temperature sensor: K class thermocouple
- Heater: Incoloy (R) Sheath Heater
- Heater capacity: 2 kW
- Interior: SUS310 S
- Door Packing: Silicone Rubber * Change to Fluororubber
- Safety device: Self-diagnostic function (Overheating, temperature sensor error, heater disconnection, SSR short circuit, ambient temperature error), indep***ent overheat prevention device, control circuit protection f***, door switch, key lock function, overcurrent/leakage breaker
- inner dimension (Valid Dimensions): W 300 mm x D 300 mm x H 300 mm (H 240 mm)
- external dimensions : W 610 mm x D 680 mm x H 810 mm
- Internal Volume: Approximately 27 L
- number of shelves pitch : 4 stages 60 mm
- Exhaust Port: φ 16 mm
- power supply (50Hz/60Hz): AC100V 21 A
- Required power supply Equipment: AC100V 30 A
- Mass: about 100 kg
- Accessories: shelf board 2 pieces, Shelf Bracket 4 pieces, Fixed metal bracket 4 pieces (Mounting Screw 8 pieces), Vent Lid 1 piece
Related product recommendations
You may also be interested in the following products
4-1795-01 Centrifuge (IKA G-L) Body + Metal Rotor (For 1.5/2.0 mL Tubes) IKA G-L
                                                                model: 4-1795-01
                                                                                                brand: IKA
                                                            
                            
                        61-3588-56 PTFE Tube For Tubing Dispenser Outer Diameter 0.76mm (Inner Diameter 0.30mm) TT-30B
                                                                model: 61-3588-56
                                                                                                brand: Musashi engineering CO., LTD.
                                                            
                            
                        1-671-21 Dry Vacuum Pump (Pressurizing/Depressurizing Convertible Diaphragm Type) 33.3kPa DAP-30
                                                                model: 1-671-21
                                                                                                brand: ULVAC, Inc.
                                                            
                            
                         
                                     
                             
                             
                            