Features

• The SK-L700R series wireless logger is a data logger that can communicate with up to 60 devices.
• Using wireless technology, it is possible to set up devices installed at remote locations, collect data, and monitor real-time measurements without requiring wiring.
• Control the repeaters and subunits from the master unit connected to the computer.
• This unit can also be ***d as a repeater. If the radio does not reach you due to an obstacle, you can improve the communication distance and condition by installing a repeater.
• The switch in the battery box enables you to switch between the master unit and the repeater.
• The master unit has two alarm output (Alarm 1, Alarm 2) functions.
• The alarm output is normally released and the contact is short-circuited when the alarm is activated.
• It can be connected to an alarm buzzer or lamp and ***d for monitoring at the time of an alarm.
• When the alarm function (s*** mail)/set condition (Exceeding the upper or lower limit/Battery level warning, etc.) occurs, the alarm mail is sent to the email address registered in advance.
• The Logger function stores measurement data in the unit (temperature type, temperature and humidity type).
• There are two types of subunits: temperature type and temperature and humidity type, and two types of sensors (integrated type and separated type) dedicated to each subunit.
• Select according to the ***.
• By using the analysis software that comes standard with the master unit, you can set up the slave unit, monitor measurement data, and collect measurement data stored on the slave unit from a remote location.
• The data collected by the analysis software can be analyzed in various ways dep***ing on the application.
• * A separately sold slave unit (Radio Temperature Logger Unit SK-L700R-T or Radio Temperature and Humidity Logger Unit SK-L700R-TH) and a sensor are required for ***.