![67-0429-79 [Discontinued]ESP32-C3 Mini Development Board WRL-18036](https://www.jgauge.com/wp-content/uploads/2025/05/859084ef9e2e6369c9c6e6ed1461ffef.webp)
suctioncupmask
67-0429-79 [Discontinued]ESP32-C3 Mini Development Board WRL-18036
Product Description
Product Model: 67-0429-79Product Brand: SparkFun Featur […]
Contact Us
Product Details
Product Model: 67-0429-79
Product Brand: SparkFun
Features
- Description
- The ESP32-C3 Mini Development Board is an entry-level development board based on ESP32-C3-MINI-1, a module named for its small size. This board integrates complete Wi-Fi and Bluetooth®LE functions.
- Most of the I/O pins on the ESP32-C3-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-C3-DevKitM-1 on a breadboard.
- Features
- WiFi
- IEEE 802.11 b/g/n-compliant
- Supports 20 MHz, 40 MHz bandwidth in 2.4GHz band
- 1T1R mode with data rate up to 150 Mbps
- Wi-Fi Multimedia(WMM)
- TX/RX A-MPDU, TX/RX A-MSDU
- Immediate Block ACK
- Fragmentation and defragmentation
- Transmit opportunity(TXOP)
- Automatic Beacon monitoring(hardware TSF)
- 4×virtual Wi-Fi interfaces
- Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode. Note that when ESP32-C3 family scans in Station mode, the SoftAP channel will change along with the Station channel
- Antenna diversity
- 802.11mc FTM
- Bluetooth
- Bluetooth LE:Bluetooth 5, Bluetooth mesh
- Speed:125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Advertising extensions
- Multiple advertisement sets
- Channel selection algorithm #2
- CPU and Memory
- 32-bit RISC-V single-core processor, up to 160MHz
- 384 KB ROM
- 400 KB SRAM(16 KB for cache)
- 8 KB SRAM in RTC
- Embedded flash(see details in Chapter 1 Family Member Comparison)
- SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to multiple external flash
- Advanced Peripheral Interfaces
- 22×programmable GPIOs
- Digital interfaces:3×SPI
- 2×UART
- 1×I2C
- 1×I2S
- Remote control peripheral, with 2 transmit channels and 2 receive channels
- LED PWM controller, with up to 6 channels
- Full-speed USB Serial/JTAG controller
- General DMA controller(GDMA), with 3 transmit channels and 3 receive channels
- 1×TWAI®controller(compatible with ISO 11898-1)
- Analog interfaces:2×12-bit SAR ADCs, up to 6 channels
- 1×temperature sensor
- Timers:2×54-bit general-purpose timers
- 3×watchdog timers
- 1×52-bit system timer Low Power Management
- Power Management Unit with four power modes Security
- Secure boot
- Flash encryption・ 4096-bit OTP, up to 1792 bits for ***rs・ Cryptographic hardware acceleration:- AES-128/256(FIPS PUB 197)
Spec
Related product recommendations
You may also be interested in the following products
63-4749-85 HS-6-5, 15.9mm High CPVC Hex Spacer 6.4mm Wide, with 2.8mm Bore Diameter for M3, No.6 Screw HS-6-5
model: 63-4749-85
brand: Richco
67-0428-45 Ball Cutter - 0.0312" Diameter, #121 (3 Pack) TOL-14852
model: 67-0428-45
brand: SparkFun