Features

• Description
• The Digilent Analog Discovery 2 is a USB oscilloscope and multi-function instrument that allows ***rs to measure, visualize, generate, record, and control mixed-signal circuits of all kinds. Developed in conjunction with Analog Devices and supported by Xilinx University Program, the Analog Discovery 2 is small enough to fit in your pocket, but powerful enough to replace a stack of lab equipment, providing engineering students, hobbyists, and electronics enthusiasts the freedom to work with analog and digital circuits in virtually any environment, in or out of the lab.
• The analog and digital inputs and outputs can be connected to a circuit using simple wire probes to connect and utilize the inputs and outputs. Driven by the free WaveForms 2015(Mac, Linux and Windows Compatible)software, Analog Discovery 2 can be configured to work as any one of several traditional instruments.
• If you would like to attach BNC probes to your Digilent Analog Discovery 2, we have the Digilent BNC Adapter Board available for you to utilize!
• Features
• Two-channel USB digital oscilloscope(1MΩ, ±25V, differential, 14-bit, 100Msample/sec, 30MHz+ bandwidth - with the * Analog Discovery BNC Adapter Board)
• Two-channel arbitrary function generator(±5V, 14-bit, 100Msample/sec, 20MHz+ bandwidth - with the Analog Discovery BNC Adapter Board)
• Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals
• 16-channel digital logic analyzer(3.3V CMOS, 100Msample/sec)
• 16-channel pattern generator(3.3V CMOS, 100Msample/sec)
• 16-channel virtual digital I/O including buttons, switches, and LEDs - perfect for logic training applications
• Two input/output digital trigger signals for linking multiple instruments(3.3V CMOS)
• Single channel voltmeter(AC, DC, ±25V)
• Network analyzer - Bode, Nyquist, Nichols transfer diagrams of a circuit. Range:1Hz to 10MHz
• Spectrum Analyzer - power spectrum and spectral measurements(noise floor, SFDR, SNR, THD, etc.)
• Digital Bus Analyzers(SPI, I2C, UART, Parallel)
• Two programmable power supplies(0...+5V , 0...-5V). The maximum available output current and power dep*** on the Analog Discovery 2 powering choice:250mW max for each supply or 500mW total when powered through USB
• 700mA max or 2.1W max for each supply when using an external wall power supply