Spec

• Adaptive model: TR-55i-P,RTR-505-P,RTR-505-PL
• Material: Vinyl chloride (coated wire)
• Measurement target: Number of pulses
• Input signal: Non-voltage contact input
• Voltage input: 0 - 27V (breakdown voltage: : -5V, +27V)
• Detection voltage: Lo: 0.5V or less, Hi: 2.5V or more
• Chattering filter ON: 15Hz or less, OFF: 3.5kHz or less
• For 0-3V square-wave signal:
• High level pulse width chattering filter ON: 35ms or more
• Chattering filter OFF: 180μs or more
• Low level pulse width chattering filter ON: 12ms or more
• Chattering filter OFF: 100μs or more
• Response polarity: Specify either Low -> High/High -> Low
• Count available maximum number: 61439/recording interval
• Input impedance: Approx 100kΩ Pull-up
• Maximum jitter width typically/approx 0.01 seconds, on communication/approx 0.1 seconds
• The above specification is applied to the cable connected to TR-55i-P.