toner
61-4676-09-56 Dust Control Waterproofing Digital Scale HV -15 KVWP with English Calibration Certificate HV15KVWP-JA
Product Description
Product Model: 61-4676-09-56Product Brand: A&D Feat […]
Contact Us
Product Details
Product Model: 61-4676-09-56
Product Brand: A&D
Features
- Measuring table that can be washed by pouring water over the whole area, Dust-proof display part, Water-proof specification IP65: It is possible to measure in places where there is a lot of dust or where there is a concern of water leakage.
- Triple range that works three times.
- Comparator display.
- Simple batch: Simple filling measurement is possible by setting output (sold separately) of three points: quantitative value, before quantification, and near zero.
- Addition (cumulative) function.
- RS-232C Standard (DIN8P Female) - Pole removable.
- Fluorescent Display
- WinCT Enabled
Spec
- Weighing: 3 kg/6 kg/15 kg
- Minimum display: 0.001 kg/0.002 kg/0.005 kg
- weighing tray Dimensions: 250 (W) x 250 (D) mm
- Display Mode: kg, Count,%
- Power Supply: power supply Cable
- Accessories: Owner's Manual, Adapter with Ground Terminal
- *A product with a calibration certificate is an original service of Azwan which calibrates measuring instruments at the time of shipment by AS ONE or a AS ONE partner company and issues calibration certificate.
- This product is a general calibration. calibration certificate (calibration certificate, test results report, traceability system chart) is attached.
- *It comes with both a set of 3 Japanese documents and a set of 3 English translations.
Related product recommendations
You may also be interested in the following products
toner
67-8074-64 JIS Standard Thermometer B7414-A -100~+30 (1.0) L305 or Less General Calibration & Traceability Certificates JC-1601-ST3
model: 67-8074-64
brand: TOA KEIKI
toner
64-4051-18 Dust Control Waterproofing Electronic Balance FX-iWP Series With General Calibration FX120iWP-JA-00A00
model: 64-4051-18
brand: A&D
toner
65-3528-69 High Performance Temperature Sensor for General Still Surfaces S-Type Series -50~300°C Low Temperature Type 15φ (Flat) 90° Type E S-113E-01-1-TPC1-ASP
model: 65-3528-69
brand: ANRITSU METER CO., LTD.
toner
62-0832-70 Compensating Lead Wire (For K Thermocouple) WX (Outer Diameter 3.1 x 5.4mm) 2m WX-H4/0.65X2KCA
model: 62-0832-70
brand: FA Ubon