Features

• Description
• This is a breakout board for the glass ferrule type f*** that fits great with our 5mm f*** clips. F***s are pretty simple, if current exceeds the rating of the f***, the small filament inside the f*** heats up and breaks(like a light bulb burning out). The circuit is then broken and hopefully your circuit is saved from molten destruction.
• For smaller loads, you may want to checkout a PTC(aka resettable f***). Dep***ing on the PTC's spec, they can handle less current(500mA)but can be set and reset many times without doing harm to your system.
• Please be aware that this breakout is just the PCB board. Additional parts will be required to get the F*** Breakout up and running so make sure to check out the Hookup Accessories section for the correct parts and the Hookup Guide for assembly instructions. Both can be found below!
• Heads up! The PCB was designed for DC power. It was not designed for AC power. Make sure that you are using the f*** breakout on the DC side for protection!
• Get Started With the F*** Breakout Board Hookup Guide