toner
61-4669-32-20 Oxygen Densitometer JKO-25 Ver3 With Calibration Certificate JKO-25ML3
Product Description
Product Model: 61-4669-32-20Product Brand: ICHINEN JIKC […]
Contact Us
Product Details
Product Model: 61-4669-32-20
Product Brand: ICHINEN JIKCO Ltd.
Features
- Large LCD display for easy viewing.
- Alarm intensity can be set arbitrarily.
- Calibration at any concentration suitable for the measured concentration or one-touch calibration with normal air (20.9%O2) is possible.
- Sensor Equipped with a long life oxygen sensor with an average life of about 3 years.
- Can measure up to 0-100vol%. Not only for research ***, but also beca*** it has an alarm function, it is an ideal machine for preventing acid shortage in the laboratory.
Spec
- Built-in sensor
- battery Drive
- Detection principle: Garbani battery type (diffusion type)
- Accuracy: ±0.5% (0 to 25%), ±3.0% (25% or more)
- Resolution: 0.1%
- Response speed: 15 seconds or less
- Size: 82 x 38 x 145mm
- Alarm: electronic buzzer, red LED
- External output: Alarm output/Analog output (0 to 1V FS)
- Power supply : AA size Alkali battery x 4 pieces (test attachment)
- Weight: 315g
- Inner diameter : φ4mm , outer diameter : φ6mm
- Accessories: Calibration certificates
- *Products with calibration certificate is a service where equipment is calibrated and calibration certificate is issued at the time of shipment.
Related product recommendations
You may also be interested in the following products
toner
toner
65-3465-84 Sealed Pressure Gauge A-Type Pressure Range (MPA): 0~0.05 325-A751X0.05MPA
model: 65-3465-84
brand: Asahi Gauge Manufacturing
toner
2-4964-01-20 Ultrafine K Thermocouple (sheath type, with connector) without Lead Wire with Calibration Certificate DS-101050
model: 2-4964-01-20
brand: AS ONE Corporation
toner
65-4300-30-20 Sealed Pressure Gauge (100Φ) Vertical A Frame with 0.16 MPa with Inspection Certificate BE10-181
model: 65-4300-30-20
brand: NAGANO KEIKI Co., Ltd.