Spec

• Measurement target: Clean air flow
• Measurement range wind speed: 0.10 - 50.0m/s
• Wind temperature: 0.0 - 100.0℃
• Display resolution wind speed: 0.00 - 9.99m/s: 0.01m/s, 0.0 - 50.0m/s: 0.1m/s
• Wind temperature: 0.1℃
• Measurement accuracy wind speed: +/- (3% of indicated value + 0.1) m/s
• Wind temperature: +/- 1.0℃
• Responsiveness wind speed: Approximately 1 second (wind speed 1m/s, At 90% response)
• Wind temperature: Approximately 30 seconds (wind speed 1m/s, At 90% response)
• Temperature compensation accuracy wind speed: In the range of 5 - 80℃, +/- (5% of indicated value + 0.1) m/s
• Measurement function: Measurement value hold, Time constant change (1, 5, 10 seconds), Battery remaining amount display (5 stages)
• Measurement units: Wind speed: m/s, FPM), Wind temperature (℃, ?)
• Maximum memory: 100 data
• Calculation function of maximum value, minimum value, average value, Wind speed value bar chart display
• Output function (digital output): RS-232C (4800, 9600, 19200, 38400bps)
• Printer output: Measurement data, Memory data, Printout of operation result
• Power supply: C size dry battery x 6, AC adapter (AC100 - 240V (50/60Hz))
• Continuous measurement hour: About 10 hours (wind speed 5m/s, Wind temperature 20℃, Not using printer, When using alkaline battery)
• Operating environment: Body/5 - 40℃, Probe/0 - 100℃
• Storage temperature: 5 - 40℃
• Mass: 1.1kg (not including battery)
• Accessories: Instruction manual x 1 volume, C size manganese battery (for testing) x 6, Probe (cable 2m) x 1, Elastic extension bar x 1, Shoulder belt x 1, Printer roll paper x 1
• Optional product: Preliminary probe *1, Communication cable, Measurement software, AC adapter, Printer roll paper
• *1 Preliminary probe of cable length of about 5m is also available.