toner
61-0117-82 Portable Turbidity/Residual Chlorine Meter HI 93414 HI93414
Product Description
Product Model: 61-0117-82Product Brand: Hanna Instrumen […]
Contact Us
Product Details
Product Model: 61-0117-82
Product Brand: Hanna Instruments
Features
- High-Performance Device for Measuring Turbidity and Residual Chlorine Using Only This Single Device Uses a state-of-the-art optical system and a tungsten light source based on EPA standards. This single device can measure turbidity, free chlorine, and total chlorine with high accuracy. You will appreciate its accuracy, especially in measuring turbidity at low concentrations (below 0.05 NTU).
- 【 Main Features 】 High accuracy turbidity measurement even in low concentration range
- Validator for numerical verification and calibration (residual chlorine)
- Unique tag identification device for recording various measurements in the field
- Ability to calibrate turbidity at 2, 3, and 4 points
- Ability to connect a PC using USB or RS232
- Ability to check calibration status with GLP function
- Ability to memorize up to 200 measurement results
- Backlight for increased efficiency
- Auto power off when not in ***
- Battery level indicator when power is on
- Current time is always displayed on the LCD
Spec
- Measurement range: Turbidity 0.00 - 9.99, 10.0 - 99.9, 100 - 1000NTU, Residual chlorine 0.00 - 5.00mg/L (with free available chlorine/total chlorine)
- Resolution: Turbidity 0.01NTU (0.00 - 9.99NTU), 0.1NTU (10.0 - 99.9), 1NTU (100NTU over), Residual chlorine 0.01mg/L (to 3.50mg/L), 0.10mg/L (3.50mg/L or more)
- Accuracy: Turbidity ±2% + 0.02NTU, Residual chlorine ±0.02mg/L (at a concentration of 1.00mg/L)
- Measurement principle: Turbidity 90° scattered light type, Residual chlorine DPD absorption photometry
- Calibration: Turbidity 2 points, 3 points, or 4 points calibration (with validator), Residual chlorine 1 point calibration (with validator)
- Use external environment: 0 - 50℃
- Light emitting source: Tungsten lamp
- Light-receiving part: Turbidity Silicone photo cell, Silicone photo cell with residual chlorine filter (525nm)
- Data memory: 200 data
- PC connections: RS232, or USB
- Waterproof: -
- Power supply: AA alkaline cell 4 pieces, or AC adapter,
- Automatic power OFF: After 15 minutes of un***d time
- Size: Length 224 x Width 87 x Thickness 77mm
- Weight: 512g
Related product recommendations
You may also be interested in the following products
toner
2-7383-11-57 Waterproof Digital Thermometer Body + Sensor with Chinese Calibration Certificate SK-270WP
model: 2-7383-11-57
brand: Sato Keiryoki Mfg. Co., Ltd.
toner
65-3503-55 Sealed Coupled Meter Type A Vibration-Resistant Pressure Range (MPA): -0.1~0.1 325-A751X0.1-0.1MPA-MV
model: 65-3503-55
brand: Asahi Gauge Manufacturing
toner
toner