Features

• PMA KS 50-1 Temperature Controller. The universal KS 50-1 temperature controller is int***ed for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be ***d for heating current measurement or as an external set-point input. The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be ***d for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be ***d freely. The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants. ; Universal continuous/switching version, i.e. reduced stocks ; 100ms cycle time, i.e. also suitable for fast control loops ; 20ms as shortest pulse for very fast / strong actuators ; Freely configurable analog output, e.g. as process value output ; Customer-specific linearisation for all sensors ; Settings can be blocked via password and internal switch for high security ; Ext***ed temperature range up to 60 °C allows mounting close to the process ; Easy 2-point or offset measurement correction ; Emergency operation after sensor break by means of the "output hold" function ; Logical combination of digital outputs, e.g. for general alarm ; Programmer with 10 segments and "***" signal ; RS 422/485 Modbus RTU interface ; Built-in transmitter power supply ; Splash-water proof front (IP65)