Features

• EN ISO 12100-1, EN ISO 12100-2, EN 60204-1, EN 954-1, EN ISO 13849-1, EN 62061, IEC 60947-5-1. CE, TUV. Smile Tina E-Stop for Vital/Pluto. Smile Tina from ABB is very easy to install, especially on aluminium extrusions. There are three different versions available, either with one or two M12 connections or cable. Two M12 connectors are ***d to enable the connection of E-stops in series, which is often ***d with dynamic safety circuits fulfilling safety category 4. On the top of the Smile Tina E-stop unit, an LED indicates the actual status according to the dynamic system. Smile Tina from ABB is int***ed for *** in safety circuits in accordance with EN 60204-1. LED indication Housing material: Polyamide PA66, Macromelt, polybutylenterephthalate PBT, Polypropene PP, UL 94 V0 Operating temperature range: -10 → +55 °C Protection class rating of IP65 Time delay t (in/out): t ; 70 μs Conforms to safety category 4 Actuator force (E-stop button): 22 +/- 4N Actuator travel: ∼ 4 mm to latch Connector: M12 5-pole male Mechanical life: > 50,000 operations Impact resistance (half sinusoidal): Max. 150 m/s2, pulse width 11 ms, 3-axis (as per EN IEC 60068-2-27) Vibration resistance (half sinusoidal): Max. 50m/s2 at 10 Hz, 10 cycles, 3-axis (as per EN IEC 60068-2-6)