Features

• AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings. Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches. Stock number ; 680-9235 680-9235 is a Keying Plug for *** with size 20 sockets Stock number ; 450-9365 450-9365 is a 4-40 threaded Locking Post assembly Stock number ; 717-4656 717-4656 is a front panel Latching Block with M3 threaded hole Stock number ; 450-9371 450-9371 is a rear panel Latching Block with 4-40 threaded hole Stock number ; 717-4634 717-4634 is a front panel Latching Block with slot recess and through hole Stock number ; 680-9392 680-9392 is a rear panel Latching Block with slot recess and through hole Stock number ; 450-9321 450-9321 is a 2 piece Spring Latch Stock number ; 717-4644 717-4644 is an EMI RF Gasket, shell size 1 Stock number ; 782-9940 782-9940 is a 4-40 threaded locking post kit Stock number ; 782-1191 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half Stock number ; 795-2292 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size Stock number ; 798-1482 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole Stock number ; 798-1498 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating. Stock number ; 822-5027 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings